Operation Manual

175
QUICK HELP
8
Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016
Changing a wheel
Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016
4. Removing the wheel with punctured tyre
- Positionthefootofthejackonthe
ground and ensure that it is directly
belowthefrontorrearjacking
point provided on the underbody,
whichever is closest to the wheel to
bechanged.
- Extendthejackuntilitshead
comesintocontactwiththejacking
point used; the vehicle's contact
area A must be engaged with the
headofthejack.
- Raise the vehicle until there is
sufcientspacebetweenthewheel
and the ground, so that the (not
punctured) spare wheel can be
easilytted.
- Resume and complete the
unscrewingofthewheelbolts.
- Remove the bolts and remove the
wheel.
- Removethewheeltrim.
- Loosen the wheel bolts and start
unscrewingthem.
Ensurethatthejackisstable,thefoot
ofthejackmustbeincontactwiththe
ground,anddirectlybelowthejacking
pointused.
If the ground is slippery or loose, the
jackmayslipordrop-Riskofinjury!
Ensurethatthejackispositionedonly
atoneofthejackingpointsunderthe
vehicle,makingsurethatthevehicle's
contact surface is centred on the head
ofthejack.
Otherwisethereisariskofdamage
tothevehicleand/orofthejack
dropping-Riskofinjury!
Donotextendthejackuntilyouhave
started unscrewing the bolts on the
wheel to be changed and have placed
thechockunderthewheeldiagonally
opposite.