Operation Manual

172
Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016
Changing a wheel
Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016
Thetemporarytyrerepairkitconsists
of a compressor and a bottle
(containingasealant).
Using the kit
- Tickthedeatedwheelonthe
speedlimitationstickerthenafx
thestickertothevehicle'ssteering
wheel to remind you that a wheel is
intemporaryuse.
- Clip the bottle 1 on the
compressor 2.
- Connect the bottle 1 to the valve of
thetyretoberepaired.
- Takecaretounwindthe
compressor pipe before connecting
ittothebottle.
- Connect the power lead to one of
thevehicle's12Vsockets.
- Switch on the compressor by
pressing button A until the tyre
pressurereaches2.0bars.Ifthis
pressure cannot be reached, the
tyrecannotberepaired.
- Removeandstorethecompressor.
- Drive immediately, for a few miles
(kilometres),atreducedspeed,to
llthepuncture.
- Adjustthepressureusingthe
compressor in accordance with the
recommendation for the vehicle and
checkthattheleakislledcorrectly
(nofurtherlossofpressure).
- Drive at reduced speed (50 mph
[80km/h]).Thetyremustbe
examined and repaired by a
specialistassoonaspossible.
After use, the bottle can be stored in
aplasticbag,suppliedinthekit,to
avoid staining your vehicle with traces
ofuid.
Warning:thesealantproductis
harmful if swallowed and causes
irritationtotheeyes.
Keepitoutofreachofchildren.
After use, do not discard the bottle into
theenvironment,takeittoaCITROËN
dealer or to an specialised waste
disposalsite.
Replacement bottles of sealant are
availablefromCITROËNdealers.
TEMPORARY PUNCTURE
REPAIR KIT
Thekitislocatedinoneofthe
two storage compartments located
underthefrontseats.
Vehicles supplied with a temporary
puncturerepairkitdonothaveaspare
wheelortooling(jack,wheelbrace,...).