Operation Manual

117
Parking sensors
SAFETY
5
Berlingo2VP_en_Chap05_Securite_ed02-2016
REVERSING CAMERA
The reversing camera is activated
automatically when reverse gear is
engaged.
The image is displayed in the touch
screentablet.
The reversing camera function may be
completedwithparkingsensors.
The reversing camera cannot in
any circumstances be a substitute
for vigilance on the part of the
driver.
High pressure jet washing
When washing your vehicle, do
not direct the lance within 30 cm of
thecameralens.
The superimposed representation of
guidelineshelpswiththemanoeuvre.
Theyarerepresentedbylinesmarked
"on the ground" and do not allow the
position of the vehicle to be determined
relativetotallobstacles(forexample:
othervehicles,...).
Some deformation of the image is
normal.
The blue lines represent the general
direction of the vehicle (the difference
corresponds to the width of your
vehiclewithoutthemirrors).
The red lines represent a distance of
about 30 cm beyond the edge of your
vehicle'srearbumper.
The green lines represent distances of
about 1 and 2 metres beyond the edge
ofyourvehicle'srearbumper.
The turquoise blue curves represent
themaximumturningcircle.
Opening the tailgate causes the
displaytodisappear.
Clean the reversing camera regularly
usingasoft,drycloth.