Installation guide

40 Feature Release 1 and Service Pack 3 Installation Guide
MetaFrame 1.8 for Windows NT 4.0 Server,
Terminal Server Edition
Hotfix Mx181T001
1. A memory leak occurred each time a client connected to Pnsvc.exe.
2. If a server published more than 100 applications, some applications could be
lost during refresh.
Hotfix Mx181T002
1. Asynchronous dialbacks occasionally failed to connect back to the client.
2. ICA dialback could not be prolonged. The server called back the client before
the client was able to set up its modem for answer mode. To make the server
delay before calling the client back:
A. Navigate to registry key
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
\Terminal Server\Wds\icawd\Tds\async
B. Add the value to the above registry key:
CallbackDelay: REG_DWORD:
{num}
where {num} is the dialback delay in seconds. A reasonable value
for the dialback delay is five seconds.
Hotfix Mx181T003
1. Files with long file names (12 or more characters) on client’s local drives were
not accessible in ICA sessions until browsing the client's system root.
2. Throughput of bytes received via redirected client serial port was poor,
especially if the server application chose to issue reads with small read buffer
sizes.
NOTE: For this fix to be complete, you must also use ICA Clients more recent
than build 4.21.779.
Hotfix Mx181T004
1. The configuration data of published applications was corrupted if there were a
large number (more than 400) of published applications in a server farm.
2. Enumerating published applications was slow for large numbers of published
applications.