Installation guide

Fixes Included in Service Pack 3 39
Hotfix Mx181W006
1. If the client Module.ini file was misconfigured by setting the WindowSize
parameter to a value greater than the MaxWindowSize parameter, client drive
mapping could cause a blue screen.
2. Files with long filenames (12 or more characters) could not be seen on the
client network from 16-bit applications.
3. Files with long filenames on the client’s local drive were not accessible until
browsing the client’s system root.
Hotfix Mx181W007
CurTm’s were displayed in logoff type in the auditlog. This caused incorrect
logon/logoff and connect times to be written.
Hotfix Mx181W008
The RunOnce key was inoperable with published applications. Applications
listed under the RunOnce key did not launch when a session was initiated through
a published application.
Hotfix Mx181W009
When the Microsoft RDP and Citrix ICA Clients were installed on the same
client computer, each would use a separate Microsoft Windows 2000 Client
Access License.
Hotfix Mx181W010
Throughput of bytes received via a redirected client serial port was poor,
especially if the server application issued reads with small read buffer sizes.
NOTE: For this fix to be complete, you must also use ICA Clients more recent
than build 4.21.779.
Hotfix MJ181W011
Could not launch published applications with names containing certain double-
byte Katakana characters, double-byte symbols, or Kanji characters. This fix
applies only to the Japanese platform.
Hotfix Mx181W012
Files and folders on client drives were inaccessible if the path length was longer
than 110 characters.