MSDS

04/17/2015Revision:
04/17/2015Printed:
Page: 3
CitriStrip Stripping Gel
SAFETY DATA SHEET
03/23/2015Supersedes Revision:
4. FIRST AID MEASURES
INHALATION:
If user experiences breathing difficulty, move to air free of vapors. Administer oxygen or
artificial respiration until medical assistance can be rendered.
SKIN CONTACT:
Wash with soap and large quantities of water and seek medical attention if irritation from
contact persists.
EYE CONTACT:
Immediately flush with water for at least 15 minutes. Get medical attention immediately.
INGESTION:
Do not induce vomiting, unless directed to by medical personnel. Call your poison control
center, hospital, emergency room, or physician immediately for instructions. Do not give
anything by mouth to an unconscious person.
Emergency and First Aid
Procedures:
Treatment of overexposure should be directed at the control of symptoms and the clinical
condition of the patient.
Note to Physician:
See Potential Health Effects.
Signs and Symptoms Of
Exposure:
5. FIRE FIGHTING MEASURES
Flash Pt:
> 200.00 F Method Used: Setaflash Closed Cup (Rapid Setaflash)
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH
approved or equivalent) and full protective gear.
Containers can build up pressure if exposed to heat (fire). Storage containers exposed to
fire should be kept cool with water spray to prevent pressure build-up. Stay away from
heads of containers that have been exposed to intense heat or flame.
Fire Fighting Instructions:
Not Applicable.
Flammable Properties and
Hazards:
Autoignition Pt:
No data.
Explosive Limits:
LEL: No data. UEL: No data.
Use carbon dioxide, dry powder, water spray, or foam.
Suitable Extinguishing Media:
None known.
Unsuitable Extinguishing
Media:
6. ACCIDENTAL RELEASE MEASURES
Isolate the immediate area. Prevent unauthorized entry. Eliminate all sources of ignition
in area and downwind of the spill area. Stay upwind, out of low areas, and ventilate
closed spaces before entering. All equipment used when handling this product must be
grounded or non-sparking. Do not touch or walk through spilled material. Stop leak if
you can do so without risk. Prevent entry into waterways, sewers, or confined areas.
Absorb or cover with dry earth, sand, or other non-combustible material and transfer to
compatible containers. For large spills, dike ahead of the spill.
Steps To Be Taken In Case
Material Is Released Or
Spilled:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format