Troubleshooting guide

ADB 3800 Set Top Box Guide
TV
FV
Below is an explanation for each of the connections listed above.
The To Wall (Video In) is for coaxial input for digital signal.
The HDMI (High-Definition Multimedia Interface) connects to a high-definition TV or home theater receiver
with an HDMI input (for a DVI input, use an HDMI-to-DVI adapter.)
The Ethernet is a RJ-45 port for IP video output.
The Pr, Pb, & Y are for RCA component video outputs to an HDTV.
The S-Video (Super Video or Separated Video) is for a high quality video output to a VCR or TV that accepts
S-Video. It carries video only; you must also connect to the TV or home theater receiver for audio.
The Optical is for a Toslink (S/PDIF) audio output to a digital home theater receiver.
The Video Out is for RCA video outputs to a TV, VCR, or other device.
The Audio Out are for left and right RCA stereo audio outputs.
The To TV (Video Out) is for coaxial output to connect the TV receiver to the TV or VCR.
The USB (Universal Serial Bus) is a USB 2.0 connector.
The Power is the connector for the DC power adapter.
HDMI
Ethernet
PrPbY
S-Video
Optical
Video Out
Audio Out
USB
Rear Panel View
TV
FV
Below is an explanation for each of the controls and lights listed above.
The Power button, if held for less than five seconds, turns the Set Top Box on or off.
If held for five seconds longer, it restarts the TV receiver. When the Set Top Box is on the light is green.
The USB (Universal Serial Bus) is a USB 2.0 connector.
The HD (High-Definition) light is green when the Set Top Box is receiving a high-definition program.
Call Citizens at [phone] to find out if you can receive HD programming as it is not available in
all areas.
The Menu button displays the Menu.
The Directional Arrows allow you to change the channels and move through the program guide.
The OK button allows you to select channels or Menu options.
HD
Menu
USB
Power
Front Panel View
Directional
Arrows
OK
31
32
Power
To TV
(Video Out)