Troubleshooting guide

ADB 2500W Set Top Box Guide
TV
FV
Below is an explanation for each of the connections listed above.
The Ethernet is a RJ-45 port for IP video output.
The S-Video (Super Video or Separated Video) is for a high quality video output to a VCR or TV that accepts
S-Video. It carries video only; you must also connect to the TV or home theater receiver for audio.
The Coaxial is for a BNC-to-RCA adapter (S/PDIF) audio output to a digital home theater receiver.
The Video Out is for RCA video outputs to a TV, VCR, or other device.
The Audio Out are for left and right RCA stereo audio outputs.
The To TV (Video Out) is for coaxial output to connect the TV receiver to the TV or VCR.
The USB (Universal Serial Bus) is a USB 2.0 connector.
The Power is the connector for the DC power adapter.
Ethernet
S-VideoCoaxial
Video Out
Audio Out
USB
Rear Panel View
TV
FV
Below is an explanation for each of the controls and lights listed above.
The Power light is green when the Set Top Box is on.
The Link light is red when the Set Top Box is receiving a channel.
The Status light is yellow when the Set Top Box is rebooting.
Link
Power
Front Panel View
29
30
Power
To TV
(Video Out)
Status