Specifications

1716

9. Using the Alarm [AL1/AL2]

Alarm 1 and Alarm 2 are different in sound only, and operating methods etc. are

all same. Once the alarm is set (On), the alarm sounds for about 15 seconds at

the set time every day. The alarm is stopped by pressing any of the buttons.

[Normal Alarm Display "ON"]

(1) Press the button M to set Alarm

1 or Alarm 2 mode.

(2) Press the button B to show a city

whose alarm is to be set.

(3) If the button B is pressed con-

tinuously for about 2 seconds, the

alarm is turned On and "Hour"

blinks.

(4) Press the button A to correct the

"Hour." (Press and hold button A

for rapid advancement.)

(5) Press the button B to blink the

"Minute".

(6) Press the button A to correct the "Minute."

(7) Press the button M to return to the normal display.

* If the watch is set to 12-hour display of Time mode, Alarm will also be set

to 12-hour display.

*Auto-Return to normal Alarm display will be activated when the watch is

left in Alarm correction state for about 2 minutes.

* If the button M is pressed in the Alarm correction state, a quick return is

made to the normal Alarm display.

When button A is pressed in normal Alarm display, "On" and "OF (OFF)" are

changed each time the button is pressed. When Alarm is set to "On", "A1" or

"A2" turns on in the digital display.

Press and hold button A in Alarm mode to make the Alarm monitor sound.

On or

OF (OFF)

City name

Alarm time

Time difference

from UTC