Specifications

1514
<Setting the Calendar>
If the calendar of any of 30 cities and UTC is set, the calendar of other cities is
automatically calculated and corrected on the basis of the time difference.
(1) Press the button M to set the calendar mode (city name display).
(2) Press the button B and show a city whose calendar is to be corrected.
(3) If the button B is pressed continuously for about 2 seconds, "Month" blinks
and watch enter the correction state. The blinking figures can be corrected.
(4) Every time the button B is pressed in the correction state, the blinking fig-
ures change in the sequence of [Month → Date → Year]. Have a desired
figure blink.
(5) Press the button A to correct the blinking figures. (Press and hold button A
for rapid advancement)
(6) Press the button M to return to the normal display.
*Auto-Return to normal Calendar display will be activated when the watch is
left in Calendar correction state for about 2 minutes.
* If the button M is pressed in the Calendar correction state, a quick return is
made to the normal Calendar display.
* Calendar can be set from 2001 through 2099 (displayed only at the time of
correction).
*Day of the week is automatically set with adjustment of Year, Month and
Date.
* The calendar is a full auto calendar. Once it is set, no month-end correction
including the leap year is required.
* If the calendar is set to a non-existing day, it is automatically corrected to
the first day of the following month when the normal display is restored.
(Example : February 30 → March 1)