Specifications

2726
15. Precautions
CAUTION
Water-Resistance Performance
There are several types of water-resistant watches, as shown in the following
table. For correct use within the design limits of the watch, confirm the level of
water-resistance of your watch, as indicated on the dial and case, and consult
the table.
•Water-resistance for daily use (to 3 atmospheres): This type of watch is water-
resistant to minor exposure to water. For example, you may wear the watch
while washing your face; however, it is not designed for use underwater.
• Upgraded water-resistance for daily use (to 5 atmospheres): This type of watch
is water-resistant to moderate exposure to water. You may wear the watch while
swimming; however, it is not designed for use while skin diving.
• Upgraded water-resistance for daily use (to 10/20 atmospheres): This type of
watch may be used for skin diving; however, it is not designed for scuba or
saturated diving using helium gas.
14. All Reset Function
After the battery is replaced, be sure to do the following all-reset operation.
If a strong impact or static electricity is applied to the watch, the watch may make
abnormal display or malfunction (no display, continuous alarm sounding etc.),
though in a rare case. In such a case, do the following all-reset operation.
M
B
A
(1) Pull the crown out.
(2) Press buttons A, B and M simul-
taneously. (All displays turn on.)
(3) If the crown is pushed in to its nor-
mal position, confirming sound is
heard.
This has completed the all-reset op-
eration.
After the all-resetting, correctly set the
time and modes before using.
Crown