Specifications

2524

(6) Press the button A to select the summer time setting (On) or cancel (OF).

In order to set for another city, watch enter the correction state for the next

city by pressing the button B again. Through the same operations sequen-

tially, display or non-display of cities should be selected and the summer time

setting should be done. (The city names can be advanced rapidly by continu-

ously pressing the button B.)

(7) After the setting for the cities is completed, press the button M to return to

the normal display.

* If the display is set to "OF" for all the cities, the city name to be displayed

in each mode is only UTC.

*Auto-Return to normal Zone Set display will be activated when the watch

is left in Zone Set correction state for about 2 minutes.

* If the button M is pressed in the Zone Set correction state, a quick return

is made to the normal Zone Set display.

13. Low Battery Warning Function

When the battery approaches its life, the

movement of second hand is changed to 2-

second interval movement (2-graduation

movement every 2 seconds).

Although the time is correctly displayed, the

function will be limited as follows.

• EL light does not turn on.

• No sounding of alarm, time-up etc.

In such a case, you are advised to replace

the battery as soon as possible.

2 seconds