Specifications

- 96 -
• Setting memory switch 4 (a = 4)
Bit b (Set Value) Function
1 48 (Default) Undefined
2 48 (Default) Undefined
48 (Default) Executes initialization at power on.
3
49 Does not execute initialization at power on.
48 (Default) Does not perform collecting operation.
4
49 Performs collecting operation.
48 (Default) Backward collection
5
49 Forward eject
48 (Default) Normal eject
6
49 Direct eject
48 (Default) Next operation disabled with paper in presenter.
7
49 Next operation enabled with paper in presenter.
8 48 (Default) Undefined
* Bit 5 of memory switch 4 is valid when memory switch 4-4 is ON.
* Bit 7 of memory switch 4 is valid when memory switch 4-4 is OFF.
• Setting memory switch 5 (a = 5) PPU-700II only
n b (Set Value) Function
48 (Default) Buzzer sound enabled.
1
49 Buzzer sound disabled.
2
48 (Default) Reserved
48 USB mode virtual serial.
3
49 (Default) USB mode printer class.
4
48 (Default) Reserved
48 (Default)
Reports the power off.
5
49
Does not report power off.
6 48 (Default) Reserved
7 48 (Default) Reserved
8 48 (Default) Reserved
fn = 4: Function 4 Sending the Set Memory Switch Value
GS ( E pL pH fn a
[Code] <1D>H<28>H<45>H<pL><pH><fn><a>
[Range] （pL＋pH×256）＝2
ｆｎ＝4
ａ＝1, 2, 3, 4
[Outline] • Sends the content of memory switch set in “a”.
Hex. No. of Data
Header 37H 1
ID 21H 1
Data 30H or 31H 8
NULL 00H 1
• Sends the set value of data in 8-byte data raw in order of bits 8, 7, 6, ....
OFF ：30H（“0”）