Specifications

- 65 -
ESC c 4 n
[Function] Selecting the Paper Near-end Sensor valid for print stop
[Code] <1B>H<63>H<34>H<n>
[Range] 0≦ｎ 255≦
[Outline] This command selects the Paper Near-end Sensor which helps to stop printing when the
paper supply almost runs out.
Each bit for “n” has the following meaning:
Value
Bit Position
0 1
0 Paper Near-end 1 Disabled Enabled
1 Paper Near-end 2 Disabled Enabled
2 Undefined ―― ――
3 Undefined ―― ――
4 Undefined ―― ――
5 Undefined ―― ――
6 Undefined ―― ――
7 Undefined ―― ――
[Caution] This printer can only select one kind of Paper Sensor, a Paper Near-end Sensor.
[Default] When memory switch 2-8 is OFF: n = 1
When memory switch 2-8 is ON: n = 0