Specifications

- 12 -
2.2 Command Details
2.2.1 Print Control Commands
LF
[Function] Printing and paper feed
[Code] <0A>H
[Outline] Prints data inside the print buffer and feeds paper based on the line feed amount having
been set.
[Caution] After this command is executed, the beginning of the line is taken as the start position
for the next point.
[See Also] ESC2
, ESC3
[Sample Program] [Print Results]
LPRINT "AAA"; CHR$(&HA);
LPRINT "BBB"; CHR$(&HA); CHR$(&HA);
LPRINT "CCC"; CHR$(&HA);
CR
[Function] Back to printing
[Code] <0D>H
[Outline] (1) When memory switch 1-5 is OFF: This command is ignored.
(2) When memory switch 1-5 is ON: The same operation as LF is executed.
[See Also] LF
[Sample Program] [Print Results]
LPRINT "AAA"; CHR$(&HD);
LPRINT "BBB"; CHR$(&HD);
LPRINT CHR$(&HD);
LPRINT "CCC"; CHR$(&HD);
AAA
BBB
CCC
Print and line feed
Print and line feed
Line feed onl
y
Print and line feed
AAA
BBB
CCC
Print and line feed
Print and line feed
Line feed only
Print and line feed
In case of (2)