Specifications

- 108 -
fn = 11: Function 11 Setting Communication Conditions of Serial Interface
GS ( E pL pH fn a d1 ... dk
[Code] <1D>H<28>H<45>H<pL><pH><fn><a>[d] k
[Range] 3≦（pL＋pH×256）≦65535 （0≦pL≦255, 0≦pH≦255）
ｆｎ＝11
1≦a≦4 (Not changed in other than specified range)
48≦d≦57 (Not changed in other than specified range)
1k≦≦6
[Outline] Sets the communication conditions of serial interface specified by “a”.
• a = 1: Setting baud rate
Baud Rate d1 d2 d3 d4 d5
2400
50(“2”) 52(“4”) 48(“0”) 48(“0”) ----
4800
52(“4”) 56(“8”) 48(“0”) 48(“0”) ----
9600
57(“9”) 54(“6”) 48(“0”) 48(“0”) ----
19200 (Default)
49(“1”) 57(“9”) 50(“2”) 48(“0”) 48(“0”)
38400
51(“3”) 56(“8”) 52(“4”) 48(“0”) 48(“0”)
• a = 2: Setting to specified parity
d1 Parity Setting
48 (Default) No parity
49 Odd parity
50 Even parity
• a = 3: Setting to specified flow control
d1 Flow Control
48 (Default)
DSR／DTR
49
XON／XOFF
• a = 4: Setting to specified data length
d1 Setting Data Length
55 7-bit length
56 (Default) 8-bit length
• Operates only in printer function setting mode.
• Which of dip SW or memory SW is used at initialization depends on “Selecting
communication condition setting” of dip SW1-1.