Specifications

Placement of the Unit
When first using the player, please take following steps to place it:
- 32 -
Pos A
1. Turn over the player with its chassis up, put it on
a soft and smooth surface.
Pos B
2. With one hand hold the player, the other hand tilt
the set stand downwards about its axis. The unit
will revolve about 90 degree (position C) at
which point you will hear a click. Set the stand
vertically with the LCD screen.
Pos C
3. Turn up the player, put it standing on the table,
then you can go on with operations for your
preference. When adjusting the screen for
viewing, please revolve the screen about the
axis, make sure the axis stands vertically.
Pos D
4. If you want to return to initial position (A), you
should pull the tab sideways first, and then tilt the
set stand upwards until the set stand is
horizontally with the LCD screen.