Specifications
System Setup  
DVD Setup Menu 
Please read this section to select the important 
settings for corresponding the DVD, TV and  
other additional audio equipment. 
  - 28 - 
1.  Remove the disc from the DVD drive 
and press the ‘DVDSETUP’ button on 
the remote control, the settings menu 
will appear. It includes General Setup, 
Speaker Setup, Dolby Digital Setup, 
Video Setup, and Preference. 
2. Press  (direction buttons) on 
the remote control to select a category.   
3.  All the items in the category will appear 
on the TV screen. Press the OK button 
to confirm your selection.   
Navigation 
1.  When you enter a category all the 
items under this category will appear, 
and the items placed in the middle (or 
highlighted) will be the current set up.   
2. Press
 (right direction button) on the 
remote control to select the correct 
category. 
3.  Press the direction button to select 
your preference. The item you select 
will be highlighted.   
4.  Press the OK button to confirm. 
5. Press
  (left direction button) to exit 
the category.   
General Setup Page   
The General Setup is shown as follows: 
- - General Setup Page - - 
TV Display  LB Normal/PS 
Angle Mark Off Normal/LB 
OSD Lang ENG Wide 
SPDIF Output 
Captions Off 
Screen Saver On 
Last Memory Off 
Set TV Display Mode 
TV Display 
The program’s screen format (e.g. Normal TV/Wide 
screen) is fixed by the DVD. Please note that this 
format might not necessarily match your TV’s 
screen format.   
Normal/PS (PAN SCAN): Choose this mode when 
your TV set has 4:3 screen format. The picture will 
fill the screen but the right and left portion will be cut. 
Normal/LB (LETTER BOX): Choose this mode when 
your TV set has 4:3 screen format. The picture will 
appear in its entire width but framed by black bars at 
the top and the bottom. 
Wide (16:9): Choose this mode when using a 16: 9 
wide screen TV set.   
NOTE: 
This feature is not accessible in this model.   
Angle Mark 
If this function is available, a camera symbol 
will appear on the screen when various angles 
are available on the DVD. Choose “Off” and no 
camera symbol will appear. 










