Specifications

Playback Functions
Switching On and Off, Stand-by
Connect the main cord to a wall outlet with a
voltage corresponding to the specifications on
the rear panel of the unit.
Press the POWER button on the front panel to
switch on the unit. You can operate all
functions, using the remote control and some
functions from the unit itself.
Press the SOURCE button to shift to
DVD-Mode.
To set the unit into standby mode press the
POWER button on the remote control. In
standby mode the unit is supplied with main
voltage but not active. In this condition you can
switch on the unit using the POWER button on
the remote control.
- 27 -
Correctly put the disc into the disc tray.
Playback will start automatically and most
discs will display a menu. You can control this
menu with the direction buttons.
Select the desired option and press the OK
button to activate. To determine what content a
disc contains, please check the disc sleeve or
packaging.
To interrupt playback press the STOP once.
The screen shows “Press Play Key To
Continue”. The player memorizes the location
where playback was stopped. Press the
PLAY button to resume playback. Not all
discs support "resume play."
If this symbol appears on the screen while
pressing a button the unit can’t carry out the
desired function, because it’s not supported by
either the DVD inserted or the current
operating mode.