Specifications

Disc Playback

Preparation：After all connections have been made, turn ON the unit and select the relevant video

input.

Disc Loading Steps:

1. Press the POWER button on the front panel of the unit. The player will search for a disc

and play it automatically.

2. Handle the disc with the printed side facing outward vertically from the disc tray. (Referring

to the below picture.)

3. Put the disc slightly into the disc tray

4. The disc will be taken automatically into the tray. "Loading" will be highlighted on the

screen and playback will begin.

Warning: Do not play poor quality discs that may damage the player’s lens.

DVD Playback

Most discs have menu selections. Press the MENU button on the remote, and then use the arrow

keys to highlight an item you would like to select. Press the OK button to select and save.

Title & Chapter

Normally there are several titles in a DVD disc, and several chapters (sections) in a title. You can

select any title or chapter quickly by entering the relevant number.

Region Code

DVD players and discs are coded by region. These regional codes must match the played discs. If

the codes don’t match, the disc cannot be played. This player’s default code is region 1.

- 22 -