Specifications

Remote Control
Preparation Of Remote Control
Insert the battery while observing the correct (+)
and (-) polarities.
- 10 -
1. Refer to the drawing; take off the empty
battery receptacle.
2. A separating film was applied to the battery
for shipment. Remove this film.
3. Insert the battery into the receptacle and
insert the receptacle into the remote.
4. Under normal use the battery will last for
six months.
5. Take out battery when the remote is not in
use for a long time.
6 . The battery type is CR2025.
Using Of Remote Control
Point the remote control unit from no more than
about 7m from the remote control sensor and
within about 60 degrees of the front of the unit.
The operating distance may vary depending
to the brightness around.
Notes:
Do not point bright lights directly at the
remote control sensor.
Do not place objects between the remote
control unit and the remote control sensor.
Do not use this remote control unit while
simultaneously operating the remote
control unit of any other equipment.