CONTENTS CONTENTS....................................................................................................................................... 1 Safety Instructions.............................................................................................................................. 2 Important Safety Instructions:............................................................................................................ 2 1. INTRODUCTION ....................................................
Safety Instructions The Lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated "DANGEROUS VOLTAGE " within the product's enclosure that may be of sufficient magnitude to constitute a risk or electric shock to persons. The Exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing instructions in the literature accompanying the product).
Important Safety Instructions Continued Ventilation - DO NOT block any ventilation openings. Install in accordance with manufacture's instructions. Slots and openings in the cabinet and the back and bottom are provided for ventilation, and to ensure reliable operation of the product and to protect it from Overheating. These openings must NOT be blocked or covered. There should be at least 10cm of space from these openings.
Important Safety Instructions Continued Damages Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions : 1.When the power-supply cord or plug is damaged. 2.If liquid has been spilled, or objects have fallen into the product. 3.If the product has been exposed to rain or water. 4.If the product does not operate normally after following the operating instructions.
1. INTRODUCTION Product Description Thank you for choosing the LCD Color TV/Monitor and for your continued support and use of our products. The LCD combines the features of a TV/MONITOR with a THIN FILM TRANSISTOR liquid crystal display (TFT-LCD).This new generation of TFT-LCD incorporates a high quality display in a lightweight module. As such the unit has power-saving capabilities and emits no X-ray radiation. There are many benefits from this TFT-LCD namely comfort, safety, and environmental protection.
Package Contents Please check the LCD TV package to make sure it contains the following items: User manual Power cord AAA size x 2 Remote Control Batteries (for remote control) 6
2. SYSTEM SETUP Top Panel & Remote Control Function 78 1 2 1. VOL 2. MENU 3 4 Decrease Volume / Left navigation key a. ENTER –Confirm Function b. MENU –Display Main Menu 3. VOL + Increase volume / Right navigation key 4. Power Power standby on or off 5. CH - Decrease TV channel / Down navigation key 6. CH + Increase TV channel/Up navigation key 7. IR IR sensor 8.
Remote Control Buttons No Description Key name Remote Control Unit 1 MUTE Turn off volume 2 POWER Power standby on or off 3 NUMBER KEYS To select items 4 CH+ Increase TV channel/Up navigation key 5 VOL + Increase volume/Right navigation key 6 ENTER Confirm Function 7 TV/VIDEO 8 SLEEP 9 INFO Change main display to TV, AV, SV, PC, CVI Set timer to turn off the machine (30/60/90/120/OFF min) To show Channel information and Input signal’s source 10 CH- Decrease TV channel/Down navi
CAUTION !! Avoid damaging the Remote Control by: Applying excessive pressure when pressing buttons Exposing to extreme Low or High temperatures Exposing to excessive moisture Remote control operating instruction The remote control transmission consists of an infrared signal (IR) Make sure the line-of-sight between remote control and LCD TV is clear of objects that could interferes with the remote IR signal. Always point the remote control directly to the LCD TV sensor.
Connecting TV Cable and earphone Connecting to AV-terminal equipment 10
Connecting to S-Video terminal equipment Connecting to YCbCr/YPbPr terminal equipment 11
Connecting to 15-PIN VGA from a PC 3. ON SCREEN DISPLAY OPERATING INSTRUCTIONS TV and AV Operating Instructions Press the Menu button to display the following Main Menu： MAIN DISPLAY Operating Instructions This session is used to Choose Input Source. Level1 Level2 Main Menu Main Disp Level3 / Function Main Disp TV 1. TV - TV Input Signal Image Setup AV 2. AV Input Signal S－Video 3. S－VIDEO Input Signal Audio Setup Press PC Setup 【Enter】 PC 4. PC - Computer Input Signal TV Setup CVI 5.
Image Setup Operating Instructions – Brightness This session is used to adjust brightness of screen picture. Level1 Level2 Main Menu Image Setup Main Disp Brightness Image Setup Contrast Audio Setup PC Setup Press Level3 / Function 50 Press 【Enter】 It will show the progress bar at screen foot. Sharpness 【Enter】 Tint Use the e and f to adjust. Press enter for return.
Image Setup Operating Instructions – Sharpness This session is used to adjust sharpness of screen picture. Level1 Level2 Main Menu Image Setup Main Disp Brightness Image Setup Contrast Audio Setup PC Setup Press Level3 / Function Press 【Enter】 Sharpness 【Enter】 Tint 1 It will show the progress bar at screen foot. Use the e and f to adjust. Press enter for return.
Image Setup Operating Instructions – Color This session is used to adjust Color of screen picture. Level1 Level2 Main Menu Image Setup Main Disp Brightness Image Setup Contrast Audio Setup Press Level3 / Function 【Enter】 It will show the progress bar at screen foot. Sharpness PC Setup 【Enter】 TINT TV Setup Color Language Return 50 Press Use the e and f to adjust. Press enter for return.
AUDIO Operating Instructions – Bass This session is used to adjust Bass of audio. Level1 Level2 Main Menu Audio Setup Main Disp Treble Image Setup Bass Audio Setup PC Setup Press Level3 / Function 1 Press 【Enter】 It will show the progress bar at screen foot. Balance 【Enter】 Return Use the e and f to adjust. Press enter for return. TV Setup Language Recall Quit NOTE: Use the ▲ and ▼ to move between the options, Press the Menu button again to select.
TV Setup Operating Instructions – AIR CATV This session is used to select TV source. Level1 Level2 Main Menu TV Setup Main Disp AIR CATV Image Setup Auto Program Audio Setup PC Setup TV Setup Press 【Enter】 Level3 / Function Press AIRTV CATV 【Enter】 It will show 2 options at screen foot. Add Erase CH Close Caption Use the e and f to select. VChip Control Press enter for confirm. Language System Setup Recall Return P.S: AIRTV means Antenna. CATV means Cable TV.
TV Setup Operating Instructions – Add Erase CH This session is used to erase TV channel. Level1 Level2 Main Menu TV Setup Main Disp AIR CATV Image Setup Auto Program Audio Setup PC Setup TV Setup Press 【Enter】 Level3 / Function Add Erase Exit. It will show 3 options at 【Enter】 screen foot. Press Add Erase CH Close Caption Use the e and f to select. VChip Control Press enter for confirm.
TV Setup Operating Instructions – VChip Control This session is used to set VChip Control option. Level1 Level2 Level3 / Function Main Menu TV Setup VChip Control Main Disp AIR CATV Image Setup Program Audio Setup PC Setup TV Setup Press 【Enter】 Press 【Enter】 Add Erase CH Set password VChip Lock Class Option Close Caption MPAA Option VChip Control Return Language System Setup Recall Return Quit When you select this option, system will NOTE: request password for entry.
TV Setup Operating Instructions – VChip Control – Class Option This session is used to set VChip Control class.
LANGUAGE Operating Instructions This session is used to select the language display of OSD. Level1 Level2 Main Menu Language Level3 / Function Main Disp Press Enter menu button to Image Setup Press Audio Setup 【Enter】 select French, Spanish or English English. PC Setup TV Setup NOTE: Language Use the ▲ and ▼ to move between the options, Recall Press the Menu button again to select.
Using the LCD as a Computer Monitor Press and release the Menu button to display the following Main Menu： MAIN DISPLAY Operating Instructions - PC Level1 Level2 Main Menu Main Disp Level3 / Function Main Disp TV 1. TV - TV Input Signal Image Setup AV 2. AV Input Signal S－Video 3. S－VIDEO Input Signal Audio Setup Press PC Setup 【Enter】 PC 4. PC - Computer Input Signal TV Setup CVI 5. CVI - Component Video Input Signal Language Return 6.
PC Setup Operating Instructions – H Position Level1 Level2 Main Menu PC Setup Main Disp Color Image Setup H Position Audio Setup PC Setup Press Level3 / Function 50 It will show the progress bar at screen foot. V Position 【Enter】 Phase Use the e and f to adjust. Press TV Setup Clock Language Auto Adjust Recall Feature Quit Return enter for return. NOTE: Use the ▲ and ▼ to move between the options, Press the Menu button again to select.
PC Setup Operating Instructions – Clock Level1 Level2 Main Menu PC Setup Main Disp Color Image Setup H Position Audio Setup PC Setup Press Level3 / Function 50 It will show the progress bar at screen foot. V Position 【Enter】 Phase Use the e and f to adjust. Press TV Setup Clock Language Auto Adjust Recall Feature Quit Return enter for return. NOTE: Use the ▲ and ▼ to move between the options, Press the Menu button again to select. ★ All values on the gauge bar only for reference.
4. REFERENCE About VChip Control Class option The following categories apply to programs designed for the entire audience. TVY All Children. This program is designed to be appropriate for all children. Whether animated or live-action, the themes and elements in this program are specifically designed for a very young audience, including children from ages 2 - 6. This program is not expected to frighten younger children. TVY7 Directed to Older Children. This program is designed for children age 7 and above.
MPAA option G: General Audiences -- All ages permitted. PG: Parental Guidance Suggested -- Some material may not be suitable for children. PG-13: Parents Strongly Cautioned -- Some material may be inappropriate for children under 13. R: Restricted -- Under 17 requires accompanying parent or adult guardian. NC-17: No One 17 and Under admitted. (Reference to http://www.mpaa.org/) PC Display Modes Mode Resolution Horizontal frequency（KHz） Vertical frequency（Hz） 1 640 x 480 31.5 KHz 60.
Troubleshooting Please use the following table to resolve the most common possible causes of the problem before calling service personnel. A minor adjustment may eliminate the problem and restore your TV reception. Symptom Corrective Actions 1. Check that power is turned on, or that power adapter lamp is lit. 2. Adjust brightness and contrast. No picture screen 3. Check input signal of TFT-LCD. 4. Check the power connection to the unit with screen. 5. Check Main Display selection.
5. APPENDIX Specifications: Specifications Model No. LT1960 LCD Panel 19" TFT-LCD Color Display Total Display Color 16.
6.
warranty service may be obtained upon delivery of the Citizen product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Citizen Service Centre. In-home warranty service may be provided at Citizen Electronics’ discretion on any Citizen television with the screen size of 27” or larger.
