User`s manual

ESC T n
[Function] Selecting the character printing direction in Page mode
[Code] <1B>H<54>H<n>
[Range] 0
£
n
£
3, 48
£
n
£
51
[Outline] Selects the direction and start position of character printing in Page mode.
n
Printing direction Start point
0,48
Left to right Top left ("A" in the figure)
1,49
Bottom to top Bottom left ("B" in the figure)
2,50
Right to left Bottom right ("C" in the figure)
3,51
Top to bottom Top right ("D" in the figure)
[Caution] •When Standard mode is selected, this command only executes the internal
flagging of the printer without affecting the printing in Standard mode.
•The character mapping position will be the start position in the print area
specified by ESC W.
•The basic pitch (x or y) used by the following commands varies with the start
point.
(1) If the start point is the top left or bottom right (the characters are mapped
in the direction perpendicular to the paper feed).
•Commands using x: ESC SP, ESC S, ESC ¥
•Commands using y: ESC 3, ESC J, GS S, GS ¥
(2) If the start point is the top right or bottom left (the characters are mapped
in the paper feed direction).
•Commands using x: ESC 3, ESC J, GS S, GS ¥
•Commands using y: ESC SP, ESC S, ESC ¥
[Default] n = 0
[See Also] "Page Mode" in Appendix 1
ESC $, ESC L, ESC W, ESC ¥, GS $, GS P, GS ¥
Print Area
Paper Feed Direction