User`s manual

ESC

[Function] Data input control

[Code] <1B> H <3D> H <n>

[Range] 0

255

[Outline] Selecting equipment in which data input from the host is effective.

•Each bit of "n" indicates as follows:

Value

Bit Equipment

0 Printer Invalid Valid

1 Not defined

2 Not defined

3 Not defined

4 Not defined

5 Not defined

6 Not defined

7 Not defined

•When the printer has not been selected, this printer abandons all the received

data until it is selected by this command.

[Caution] •Even when the printer has not been selected, it can become BUSY state through

printer operation.

•When the printer is deselected, this printer discards all the data until it is

selected with this command. (Except DLE ENQ1 and DLE ENQ2)

[Default] n = 1

[See Also] DLE ENQ

[Sample Program] [Print Results]

LPRINT "AAAAA" ;

LPRINT CHR$ (&H1B) ; "=" ; CHR$ (0) ;

LPRINT "aaaaa" ; CHR$ (&HA) ;

LPRINT CHR$ (&H1B) ; "=" ; CHR$ (1) ;

LPRINT "AAAAA" ; CHR$ (&HA) ;