User`s manual

(1) Printer status (when n = 1 is specified)
Bit Status Hex. Decimal
0 Unused 00 0
1 Unused 02 2
Status of pin 3 of drawer kick connector = L 00 0
2
Status of pin 3 of drawer kick connector = H 04 4
Online status 00 0
3
Offline status 08 8
4 Unused 10 16
5 Undefined
¾¾
6 Undefined
¾¾
7 Unused 00 0
(2) Status caused by an offline condition (when n = 2 is specified)
Bit Status Hex. Decimal
0
U
UU
Un
nn
nu
uu
us
ss
se
ee
ed
dd
d
00 0
1 Unused 02 2
Cover closed 00 0
2
Cover open 04 4
Not in paper feed state triggered by FEED switch 00 0
3
In paper feed state triggered by FEED switch 08 8
4 Unused 10 16
Printing is not stopped because of "paper out" state 00 0
5
Printing is stopped because of "paper out" state 20 32
Error not occurred 00 0
6
Error occurred 40 64
7 Unused 00 0
Bit 5: Printing is stopped if the paper end detector detects a "paper out" state, or if
the printer is out of paper when the paper near-end detection is enabled by
ESC4. At this time, bit 5 = "1."
(3) Status caused by an error (when n = 3 is specified)
Bit Status Hex. Decimal
0 Unused 00 0
1 Unused 02 2
2 Undefined
¾¾
Auto cutter error not occurred 00 0
3
Auto cutter error occurred 08 8
4 Unused 10 16
Unrecoverable error not occurred 00 0
5
Unrecoverable error occurred 20 32
Auto recovery error not occurred 00 0
6
Auto recovery error occurred 40 64
7 Undefined 00 0