User`s manual

Cutter motor lock ----- If the cutter position sensor in the cutter unit is left turned on or off for
approx. 1 second while the cutter motor is running, cutter operation and
printing will be suspended, determining it to be motor lock. See 4.7
"Unlocking the Cutter."
3. FEED switch
Press and release this switch immediately to feed paper by one line. Press it continuously to
feed paper continuously. Press this switch to execute macro when the system is awaiting
macro-execution.
4. FEED and Power Switches
Press the FEED and POWER switches simultaneously to run self-print.
POWER Lamp (Green)
ERROR Lamp (Red)
FEED Switch