User`s manual

(2) Before using the printer, remove the protective paper for the head as shown below:

1. Open the printer cover.

2. Pull the platen levers at both sides of the platen roller unit in the direction of the arrows.

3. Pull the protective paper in the direction of the arrow.

4. Insert a sheet of printer paper between the platen roller and the head when the printer is to

remain unused for a long period of time.

N N

N :

• Install the printer on a flat and stable desk.

• Do not install the printer near a heater or in a place exposed to direct sunlight.

• Do not use the printer in a high-temperature, high-humidity, and contaminated environment.

• Do not allow dew condensation on the printer. If dew is condensed on it, leave the power

turned off until dew condensation is gone.

Platen Lever

Printer Cover