User`s manual

________________________________________________________
72
Appendix B: Maintenance
_________________________________________________________________
Problem: Paper does not feed from the automatic sheet feed&.
√
Is the paper select lever in the rear {single sheet} position?
√ Be sure the A.S.F. {automatic sheet feeder} is enabled by
setting the VuePrint menu or the INSTALL menu.
√ Be sure the paper loading lever of the automatic sheet
feeder was not left in the "paper release" position?
√ Turn off the printer and turn the paper feed knob
clockwise. If the automatic sheet feeder ejection rollers
DO NOT rotate, remove the ASF and reinstall it correctly.
√ Be sure your software is set up for "Bin 1" or "Feeder."
Problem: Paper does not feed from the manual sheet feeder.
√ Be sure the A.S.E {automatic sheet feeder} selection made with
the Vueprint menu or the INSTALL menu is off.
Problem: An envelope feeds crooked.
√ You should open the envelope flap before feeding.
√ Is the paper select lever in the rear {single sheet} position?
Printing Operation
Problem: Printhead does not move.
√ Open the top cover and try turning the ribbon knob. if it is
jammed, replace the ribbon cassette with a new one.
√ Check inside the printer for excessive dust or dirt that may be
restricting the printhead's movement.