User`s manual

________________________________________________________

Appendix A: Options

_________________________________________________________________

There is a short cut for turning on color when the printer is on line.

Simply move the MENU slide switch to the INSTALL position and

hold the COLOR RIBBON key for 3 seconds. You can then select

colors by pressing the COLOR RIBBON key additional times as

described below.

To configure the printer's macro memory for a color ribbon, follow

these steps:

I. Move the MENU slide switch to VuePrint.

2. Press and hold the MENU key for three seconds to enter the

VuePrint menu.

3. The first item on the VuePrint menu is RIBBON. Press the

SELECT key until the printhead points to COLOR.

4. Press the SAVE key to save the setting.

5. Move the MENU slide switch back to the ON LINE position.

If you change back to a normal black ribbon, repeat these steps and

select NORMAL.

Selecting Colors with the Control Panel

If you have installed the color kit and color ribbon and configured

your printer as described in the preceding sections, you can use the

control panel to select a color for printing. To do so, follow these

steps:

1. Be sure the printer is on line. {The ON LINE indicator should

be lit.}

2. Move the MENU slide switch to the INSTALL position.

3. Press the COLOR RIBBON key the number of times indicated

in Table A-I to select a color. The menu lights by the colored

menu windows tell you which color you have selected.

4. Press any other key or move the MENU slide switch to return

on line and resume printing.