User`s manual

________________________________________________________
61
Color On Command
TM
_______________________________________________________________________
You must use the menu to install the color option before using the
printer to avoid damage to the printer. This menu selection causes
more power to be applied to the carriage motor when the color
ribbon is installed.
Once you install the color motor, you need not remove it to replace
the color ribbon cassette with a standard black ribbon cassette.
Configuring the Printer
If you plan to use the color ribbon only for a short time, you can
use the control panel's INSTALL menu; to configure the printer.
Settings you make this way are lost when you turn the printer off.
If you plan to leave the color ribbon installed in the printer, use the
VuePrint menu to store your change in the GSX-190's nonvolatile
macro memory. Both methods are described below.
To make a temporary setting, follow these steps:
1. Switch the printer off line. {With the MENU slide switch in the
ON LINE position, press the ON LINE key until the ON LINE
indicator is off.}
2. Move the MENU slide switch to the INSTALL position.
3. Press the COLOR RIBBON key to turn its menu light on.
4. Switch the printer on line. {Move the MENU slide switch back
to ON LINE and press the ON LINE
If you switch back to the normal black ribbon, simply repeat these
steps to turn the COLOR RIBBON menu light off.