User`s manual

________________________________________________________
30
Other Command-Vue Functions
Code page {IBM
emulation only}
Selects among code pages, a method
that DOS computers use to display and
print foreign-language characters.
Tear off Selects/cancels the feature where the
GSX-190 advances continuous forms
to the tear bar for easy removal after
printing.
Paper out Enables/disables the paper-out sensor.
Auto CR {IBM
emulation only}
Automatically returns the print head to
the left margin after every line-feed
command.
Auto LF Automatically advances the paper one
line after each carriage return
command.
Other Command-Vue Functions
In addition to the options and functions shown in the menu
windows, the Command-Vue control panel performs some other
functions that are not so obvious. These functions are summarized
in Table 2-8.
Function Procedure
Adjust top margin
{top-of -form
position}
With paper at the top-of-form position
and the printer on line, press
PARK/LOAD or LF/FF br three
seconds. See "Top-of-Form Fine
Adjustment" in Chapter 3 for more
information.
Adjust tear-off
position
-
With paper at the tear bar, press ON
LINE and QUIET/SAVE for three
seconds. See 'PaperTear-Off
Adjustment" in Chapter 3 for more
Information.
Clear print buffer While the printer is oft line, press
QUIET/SAVE {in the ON LINE
menu group} for more than three
seconds.
Turn on color
printing while printer
is on line
Switch to Install menu, press COLOR
RIBBON key for three seconds.
Hexadecimal dump
of print stream
Press QUIET/SAVE while turning the
printer power on. See "Hex Dump" in
Appendix B for more information.
Table 2-8. Other Command-Vue Functions.