User`s manual

________________________________________________________
29
Chapter 2: Command-Vue III Control Pane
_________________________________________________________________
A few additional settings are available only through the VuePrint
menu {or through software commands, which are explained in
Appendix D}. These settings are explained in Table 2-7.
Menu Description
Emulation Selects Epson FX-800 commands or IBM
Proprinter Ill commands. Be sure you select the
same printer commands here as you have
chosen In your software.
Line spacing Selects 6 lines per Inch {standard typewriter
spacing} or 8 lines per Inch. You can specify
other spacing values with software commands.
Form length Selects among several standard form lengths.
Set this to match your paper size, whether you
use continuous forms or single sheets.
Page skip {Epson emulation
only}
Selects/cancels a bottom margin of one inch.
NLO dir Selects bi-directional or unidirectional printing of
text. Bi-directional prints faster; unidirectional
prints with bolter quality.
Graphic dir Selects bi-directional or unidirectional printing of
bit-Image graphics.
Slash zero
Selects/cancels printing a slash through zeros so
they are easily distinguished from the letter 0.
Character set Selects among different character sets.
International character set
{Epson emulation only}
Selects among the foreign-language character
sets.
Table 2-7. VuePrint menu options.