Service manual

PN 4237242C
vii
CONTENTS
4.9 DILUTER RESOURCE ADAPTER (DRA) 1 AND 2 CARDS,4.9-1
Tools/Supplies Needed,4.9-1
Removal,4.9-1
Installation,4.9-2
Verification,4.9-2
4.10 MEMBRANE KEYPAD AND DISPLAY, 4.10-1
Tools/Supplies Needed,4.10-1
Removal,4.10-1
Installation,4.10-2
Verification,4.10-2
4.11 AC POWER/VACUUM RELAY CARD,4.11-1
Tools/Supplies Needed,4.11-1
Removal,4.11-1
Installation,4.11-1
Verification,4.11-2
4.12 +24 VOLT SWITCHING POWER SUPPLY, 4.12-1
Tools/Supplies Needed,4.12-1
Removal,4.12-1
Installation,4.12-2
Verification,4.12-3
4.13 LINEAR POWER SUPPLY CARD,4.13-1
Tools/Supplies Needed,4.13-1
Removal,4.13-1
Installation,4.13-2
Verification,4.13-3
4.14 VACUUM SENSOR CARD,4.14-1
Tools/Supplies Needed,4.14-1
Removal,4.14-1
Installation,4.14-2
Verification,4.14-2
4.15 MOTOR/SOLENOID DRIVER CARD, 4.15-1
Tools/Supplies Needed,4.15-1
Removal,4.15-1
Installation,4.15-1
Verification,4.15-2
4.16 SENSOR PREAMP ADAPTER (SPA) CARD,4.16-1
Tools/Supplies Needed,4.16-1
Removal,4.16-1
Installation,4.16-2
Verification,4.16-3
4.17 PROBE AND PROBE WIPE,4.17-1
Tools/Supplies Needed,4.17-1
Removal,4.17-1