Service manual

PN 4237242C
v
CONTENTS
2.5 DATA ACQUISITION,2.5-1
Sensor Preamp Adapter (SPA) Card,2.5-1
Inputs,2.5-1
Outputs,2.5-2
Adjustments,2.5-2
Jumpers,2.5-2
Hgb Preamp Card,2.5-3
Inputs,2.5-4
Outputs,2.5-4
Adjustments,2.5-4
Test Points,2.5-4
Vacuum Sensor Card,2.5-4
Inputs,2.5-5
Outputs,2.5-5
Adjustments,2.5-5
Test Points,2.5-6
Sensor Processing Adapter with Diagnostics (SPAD) Card,2.5-6
Power Supply Conditioning,2.5-7
Oscillator Circuit,2.5-7
Control Functions,2.5-7
Octal Digital-to-Analog Converter (DAC),2.5-8
Aperture Signal Processing,2.5-8
Data Acquisition Circuit,2.5-8
Test Pulse Generator,2.5-9
Interrupt Selector,2.5-9
Input,2.5-9
Outputs,2.5-9
Jumper,2.5-10
Adjustments,2.5-10
2.6 PERIPHERALS,2.6-1
Floppy Disk Drive,2.6-1
Display,2.6-1
Keypad,2.6-1
Rear Panel Interface Connectors,2.6-1
3 INSTALLATION PROCEDURES,3.1-1
PART A: INSTRUMENT INSTALLATION
3.1 PREINSTALLATION CHECKS,3.1-1
Space and Accessibility Requirements,3.1-1
Power Requirements,3.1-1
3.2 INITIAL SETUP,3.2-1
Unpack the Instrument,3.2-1
Connect the Reagents,3.2-2
Connect the Printer,3.2-3
Enter the Initial Settings,3.2-4