Service manual

PN 4237242C
2-iii
CONTENTS
2
Outputs,2.5-9
Jumper,2.5-10
Adjustments,2.5-10
2.6 PERIPHERALS,2.6-1
Floppy Disk Drive,2.6-1
Display,2.6-1
Keypad,2.6-1
Rear Panel Interface Connectors,2.6-1
ILLUSTRATIONS
2.1-1 Functional Diagram,2.1-1
2.1-2 Software Menu Tree,2.1-3
2.2-1 Top View into Upper Chassis,2.2-3
2.2-2 Top View into Lower Chassis,2.2-4
2.2-3 AC Power/Vacuum Relay Card,2.2-5
2.2-4 Linear Power Supply Card,2.2-7
2.3-1 Fluidics Panel Components,2.3-1
2.3-2 Diluter Panel,2.3-3
2.3-3 Probe-Wipe Traverse Assembly,2.3-5
2.3-4 Peristaltic Pump Assembly,2.3-5
2.3-5 Syringe Assembly,2.3-6
2.4-1 AT Motherboard,2.4-2
2.4-2 URA Card,2.4-5
2.4-3 DRA Card,2.4-8
2.4-4 Motor/Solenoid Driver Card,2.4-12
2.5-1 Sensor Preamp Adapter Card,2.5-3
2.5-2 Vacuum Sensor Card Block Diagram,2.5-5
2.5-3 Vacuum Sensor Card,2.5-6
2.5-4 SPAD Card,2.5-10
TABLES
2.1-1 Functions the Diluter Table Can Use,2.1-4
2.1-2 Aspiration Cycle,2.1-5
2.1-3 Power-Up Cycle,2.1-6
2.2-1 AT Power Supply Output Connectors,2.2-1
2.2-2 AC Power/Vacuum Relay Card Connectors and Line Input Ranges,2.2-6
2.2-3 Linear Power Supply Card Test Points,2.2-8
2.3-1 Diluter Panel Solenoids and Their Function,2.3-4
2.3-2 Peristaltic Pumps Location and Function,2.3-6
2.3-3 Flex Connect Card Connectors and LEDs,2.3-7
2.3-4 Solenoid Interconnect Card Connectors and LEDs,2.3-8