Service manual

PN 4237242
INDEX-11
INDEX
SVP, 5.1-1
sweep-flow system
Diluter Panel, 2.3-2
sweep-flow tubing
installation procedures, 4.26-2
interaction with Diluter Panel, 4.26-1
location, 4.26-1
location of components, 4.26-1
part number, 4.26-2
removal procedures, 4.26-1
tools/supplies needed for replacement, 4.26-1
verification procedures, 4.26-2
switch settings
Ac Select switch, 3.2-1
AT motherboard, 2.4-1, A.2-1
URA card, 2.4-6, A.2-4
switches
Ac Select switch, 2.2-2
instrument’s power ON/OFF
switch, 2.2-1, 2.2-2
Syringe Assembly
components, 2.3-6
description, 2.3-6
ERROR DETECTED (026) Aspirate Syringe
Failure, 7.4-1, C.2-1
ERROR DETECTED (027) Aspirate Syringe
Failure, 7.4-1, C.2-1
ERROR DETECTED (028) Diluent Syringe
Failure, 7.4-1, C.2-1
ERROR DETECTED (029) Diluent Syringe
Failure, 7.4-1, C.2-1
installation procedures, 4.21-3
location of components, 2.3-6
location on Fluidics Panel, 2.3-1
part number, 8.1-4
parts explosion, 8.2-10
removal procedures, 4.21-1
stepper motor, 2.3-6
tools/supplies needed for replacement, 4.21-1
verification procedures, 4.21-4
syringes
PMI recommendations, 5.2-1
System Control section
AT motherboard, 2.4-1
components, 2.4-1
DRA card, 2.4-1
functional relationship, 2.1-1
Motor/Solenoid Driver card, 2.4-8
URA card, 2.4-1, 2.4-2
system verification procedure, 5.1-1
T
Timer Not Operational
description, C.3-1
timing chart
diluter table, 2.1-4
for troubleshooting, 2.1-4
top cover
removing, 2.2-3
traverse drive belt
installation procedures, 4.19-2
removal procedures, 4.19-1
tools/supplies needed, 4.19-1
verification procedures, 4.19-3
traverse motor
installation procedures, 4.20-2
location of components, 4.20-1
Motor/Solenoid Driver card, 2.4-9
Probe/Wipe Traverse Assembly, 2.3-4
removal procedures, 4.20-1
tools/supplies needed for replacement, 4.20-1
verification procedures, 4.20-3
troubleshooting
display, 2.6-1
generating a Service Report, 7.2-1
lyse system, 2.3-8
safety precautions, 1.2-2
sample screen display, 7.2-1
sample Service Report, 7.2-1
Service Diagnostic, 7.3-1
table showing Diluter Functions menu
options, 7.1-1
table showing Service Diagnostic cycle, 7.3-1
table showing Service menu options, 7.1-2
using timing chart, 2.1-4
U
Unable to Create INF File, 7.4-5
description, C.1-1
URA card
adjustments, 2.4-5
CMOS RAM, 2.4-3, 7.4-4
components, 2.4-2
description, 2.4-2
Diagnostic Data Acquisition circuit, 2.4-4
display, 2.4-2
display controller, 2.4-3
ERROR DETECTED (008) URA Board
Failure, 7.4-5, C.2-1