Service manual

PN 4237242
8-INDEX
INDEX
table showing connector, power ranges, part
numbers, 3.1-2
power supplies
+24 V power supply, 2.2-6
AT power supply, 2.2-1
description, 2.2-1
ERROR DETECTED (014) Power Supply
Failure, 7.4-2, C.2-1
ERROR DETECTED (015) Power Supply
Failure, 4.12-3, 7.4-3, C.2-1
fuses used, 2.2-1
input/output voltage, 2.2-1
interaction with DRA card, 2.2-1
interaction with Linear Power Supply card, 2.2-1
interaction with Motor/Solenoid Driver
card, 2.2-1
Linear Power Supply card, 2.2-6
Power Supply Conditioning card
description, 2.5-7
interaction with +24 V power supply, 2.5-7
Power Supply section
functional relationship, 2.1-1
POWERFAIL signal, 2.4-8
interaction with Motor/Solenoid Driver
card, 2.4-10
location, 2.2-6
on +24 V power supply, 2.4-10
power-up cycle
table of timing activities, 2.1-5
preinstallation checks
accessibility requirements, 3.1-1
power requirements, 3.1-1
space requirements, 3.1-1
table showing space requirements, 3.1-1
Printer
CITIZEN GSX-190 part number, 8.1-5, 8.2-5
CITIZEN GSX-190 settings, 3.2-4, A.3-1
connecting, 3.2-3
Epson TM-290P Slip Printer DIP switch
settings, D.1-2
Epson TM-290P Slip Printer operator
controls, D.1-1
Epson TM-290P Slip Printer self test, D.1-2
Epson TM-290P Slip Printer
specifications, D.1-1
ERROR DETECTED (017) Unable to Sense
Diluent Level, C.2-1
ERROR DETECTED (019) System Disk File
Corrupt, C.2-1
installing Graphic only, 3.2-3
installing Ticket and Graphic, 3.4-3
installing Ticket only, 3.4-1
locations of connections, 3.2-3
verify operation of port, 4.6-4
probe and probe wipe
installation procedures, 4.17-2
location of components, 4.17-1
removal procedures, 4.17-1
tools/supplies needed for replacement, 4.17-1
verification procedures, 4.17-3
probe motor, 7.4-3
installation procedures, 4.18-1
interaction with Probe/Opto Sensor card, 4.18-1
Motor/Solenoid Driver card, 2.4-9
Probe/Wipe Traverse Assembly, 2.3-4
removal procedures, 4.18-1
tools/supplies needed for replacement, 4.18-1
verification procedure, 4.18-1
Probe/Opto Sensor card
interaction with probe motor, 4.18-1
part number, 8.1-4, 8.2-7
Probe/Wipe Traverse Assembly
adjustments, 2.3-4
components, 2.3-4
ERROR DETECTED (030) Probe Mechanism
Failure, 7.4-3, C.2-1
ERROR DETECTED (031) Probe Mechanism
Failure, 7.4-3, C.2-2
ERROR DETECTED (032) Probe Mechanism
Failure, 7.4-3, C.2-2
ERROR DETECTED (033) Probe Mechanism
Failure, 7.4-3, C.2-2
ERROR DETECTED (034) Probe Mechanism
Failure, 7.4-3, C.2-2
function, 2.3-1, 2.3-4
interaction with Flex Connect card, 2.3-7
location of components, 2.3-4
location on Fluidics Panel, 2.3-1
part number, 8.1-4
parts explosion, 8.2-6
probe motor, 2.3-4
traverse motor, 2.3-4
procedures
accessing hidden service menu items, 4.2-1
accessing the Service Disgnostic, 4.2-1
accessing the Service Report, 4.2-1
AIM adjustment, 4.28-1
calibration, 3.3-1