Service manual

PN 4237242
INDEX-7
INDEX
table of input connectors, 2.4-10
table of jumper settings, 2.4-11, A.2-3
table of output connectors, 2.4-10
table of test points, 2.4-11, A.2-3
table showing jumper settings, A.2-3
tools/supplies needed, 4.15-1
unpacking the instrument, 3.2-1
verification procedures, 4.15-2
motors
DRA card, 2.4-6, 2.4-7
interaction with DRA card, 7.4-2
Motor/Solenoid Driver card, 2.4-9
peristaltic pump motors, 4.22-2
probe motor, 2.3-4, 2.4-9
stepper motor, 2.3-4, 2.3-6, 2.4-6, 2.4-7
Syringe Assembly, 4.21-3
traverse motor, 2.3-4, 2.4-10, 4.20-1, 4.20-2
N
note
definition, 1.1-2
O
octal DAC
description, 2.5-8
opening the lower chassis
procedures, 4.4-1
optional ticket printer
installation, 3.4-1
locations of connections, 3.2-3
Oscillator circuit
description, 2.5-7
SPAD card, 2.5-7
P
Parity Error
description, C.3-1
part numbers
cables, 8.1-1
customer manuals, 1.1-1
fuses, 8.1-3
lower chassis items, 8.1-2, 8.1-3, 8.1-4
miscellaneous hardware items, 8.1-7, 8.1-8
peripherals and support items, 8.1-5
upper chassis items, 8.1-6
PD.DAT file
CMOS RAM, 2.4-3
errors, 2.4-3
peripherals
display, 2.6-1
floppy drive, 2.6-1
keypad, 2.6-1
Peripherals section
functional relationship, 2.1-1
Peristaltic Pump Assembly
components, 2.3-5
description, 2.3-5
location on Fluidics Panel, 2.3-1
parts explosion, 8.2-12
peristaltic pump motors, 4.22-2
table showing location and function, 2.3-6
peristaltic pump motor and spool
installation procedures, 4.22-2
location, 4.22-1
location of components, 4.22-1
removal procedures, 4.22-1
tools/supplies needed for replacement, 4.22-1
verification procedures, 4.22-2
peristaltic pump tubing
PMI recommendations, 5.2-1
peristaltic pumps
on Fluidics Panel, 2.3-1
table showing location and
function, 2.3-6, A.4-1
verify operation, 4.9-2, 4.15-3, 4.22-2
PLT PREAMP signal
table showing SPAD card connections, 2.5-9
PLT signal
table showing Sensor Preamp Adapter card
connections, 2.5-2
PMI recommendations
AIM Adjustment procedure, 5.2-2
cleaning, 5.2-1
filters, 5.2-1
Hgb preamp adjustment procedure, 5.2-2
latex gain adjustment procedure, 5.2-2
peristaltic pump tubing, 5.2-1
polyurethane tubing, 5.2-1
syringes, 5.2-1
verification procedures, 5.2-2
polyurethane tubing
PMI recommendations, 5.2-1
positioning, 7.4-3
power, 2.1-6
power ranges, 3.1-1
table showing connector and power
ranges, A.2-1