Service manual

PN 4237242
INDEX-5
INDEX
F
filters
PMI recommendations, 5.2-1
Flex Connect card
function, 2.3-7
interaction with Probe/Wipe Traverse
Assembly, 2.3-7
LED power indicator, 2.3-7
location, 2.2-3, 4.4-1
part number, 8.1-4, 8.2-3
solenoids, 2.3-7
table of connectors, solenoids, LEDs, 2.3-7
floppy drive
description, 2.6-1
ERROR DETECTED (018) Copy Protection
Violation, 7.4-1, C.2-1
location, 2.2-3
part number, 8.1-6, 8.2-4
verify operation, 4.6-4
fluid reservoir
Fluidics Panel, 2.3-7
fluidic solenoids
Diluter Panel, 2.3-1, 2.3-4
table showing name, type, function, 2.3-4
Fluidics Panel
components, 2.3-1
cycle counter, 2.3-7
fluid reservoir, 2.3-7
function, 2.3-1
internal seals, 2.3-8
location, 2.3-1
location of components, 2.3-1
lyse pump, 2.3-8
vacuum regulator, 2.3-9
Fluidics Panel section
functional relationship, 2.1-1
fuses
on +24 V power supply, 2.2-6
on AC Power/Vacuum Relay card, 2.2-2
part numbers, 8.1-3, 8.2-5
H
HEMOGLOBIN signal
Hgb Preamp card, 2.5-3
Hgb
sample analysis of results, 7.2-3
Hgb Blank Voltage High
description, C.1-1
Hgb Blank Voltage Low
description, C.1-1
Hgb Preamp adjustment procedure
PMI recommendations, 5.2-2
steps, 4.29-1
tools/supplies needed for replacement, 4.29-1
Hgb Preamp card
adjustments, 2.5-3, 2.5-4
description, 2.5-3
HEMOGLOBIN signal, 2.5-3
location, 2.2-3, 4.4-1
part number, 8.1-4, 8.2-3
table showing adjustments, A.1-1
test points, 2.5-4, A.2-2
VOLTAGE READINGS, 7.1-2
hidden menu items for service
location, 2.1-2
I
important
definition, 1.1-2
initial setup of instrument
calibrate the instrument, 3.3-1
connect the Printer, 3.2-3
peristaltic pump tubing, 3.2-1
startup the instrument, 3.3-1
unpack the instrument, 3.2-1
installation procedures
instrument, 3.2-1
optional Printers, 3.4-1
instrument cycling
description, 2.1-2
intelligent software link (ISL) option
description, E.1-1
J
jumper settings
AC Power/Vacuum Relay
card, 2.2-5, 3.1-2, 3.2-1, A.2-1
AT motherboard, 2.4-1, A.2-1
DRA card, 2.4-8, A.2-2
Linear Power Supply card, 2.2-8, A.2-2
Motor/Solenoid Driver card, 2.4-11, A.2-3
Sensor Preamp Adapter card, 2.5-2, A.2-4
URA card, 2.4-6, A.2-4