Service manual

PN 4237242C
C.2-2
MESSAGE/ERROR CODE LISTINGS
INSTRUMENT FATAL ERROR MESSAGES
031
Probe Mechanism Failure
The probe was at the top position when it should not have been.
032
Probe Mechanism Failure
The probe was not above the WBC bath when it should have been.
033
Probe Mechanism Failure
The probe was not above the RBC bath when it should have been.
034
Probe Mechanism Failure
The probe was not at the aspirate station when it should have been.
037
Software Fatal Error
During the execution of the system software, a software error occurred.
038
RAM Drive Failure
The system was unable to create a Virtual RAM drive.
039
SPAD Board Failure
A/D conversion timeout for a SPAD A/D operation.
Table C.2-1 Fatal Error Messages
(Continued)
Error Code Displayed Message Description