Service manual

PN 4237242C
8.2-9
PARTS LISTS
ILLUSTRATED PARTS
8
Table 8.2-7 Diluter Assembly (See Figure 8.2-7)
Item Part Number Description
1 6232717-1 Valve, Angar 3-way solenoid fluidic
2 6232718-9 Valve, Angar 2-way solenoid fluidic
3 6805080-4 Chamber, vacuum isolator (VIC)
4 1022944-8 Spool, sweep-flow tubing retainer, machined (behind cover plate)
1022895-6 Spool, sweep-flow tubing retainer, molded (behind cover plate)
5 3202220-1 Tubing, sweep-flow (13 ft needed)
6 6705777-5 Aperture block, RBC
7 6805226-2 Bath, aperture, with external electrode connector, machined
6232477-5 Fitting, nylon hose, for machined baths
6805247-5 Bath, aperture, with external electrode connector, molded plasma treated (use when
available)
8 6805031-6 Bushing, rear aperture module clamp
9 2851905-2 Screw, aperture bath mounting thumbscrew
10 1022916-2 Bushing, front aperture bath clamp
11 6805033-2 LED, Hgb
12 2852022 Screw, SEMS, pan head Philiips, Screw, 4-40 x 1/4 in.
13 6805010-3 Sensor, Hgb photodetector
14 1022792-5 Washer, rubber
15 2121927-4 Connector, 1-pin plug, mini univ MATE-N-LOK
16 2523657-2 O-ring, aperture/aperture bath seal
17 2121928-2 Connector, 1-pin cable, mini univ MATE-N-LOK
18 6705778-3 Aperture block, WBC
19 na Housing, rear Aperture Electrode module
not shown 2512120-1 O-ring, small, aperture/aperture module seal
not shown 3814255-1 Filter, Hgb, 525 nm (green) optical filter
not shown 6216357-7 Fitting, sweep-flow