Service manual

PN 4237242C
6.1-1
6
6
SCHEMATICS AND BLOCK DIAGRAMS
6.1 DOCUMENT CONTROL NUMBERS AND DESCRIPTIONS
Table 6.1-1 includes Document Control Numbers (DCNs) and descriptions for the
schematics/diagrams found in Heading 6.2, SCHEMATICS. Table 6.1-2 includes DCNs for
schematics that are available but not included in this manual.
The schematics included in this chapter are updated to the latest revision level whenever this
manual is revised. Because the schematics are not assigned figure numbers or page numbers,
they cannot be included in the table of contents or the index.
IMPORTANT
Risk of instrument malfunction or erroneous results. Official schematics and drawings in this
section will be revised only with revision of the manual. They will be current on the date of the first printing
of a revision. Reprints between manual revisions will not be updated with current drawing revisions. It is the
user's responsibililty to update these drawings between manual revisions
Table 6.1-1 DCNs and Descriptions for Schematics Included in This Manual
DCN Description
6321447 Timing Charts
6321448 Pneumatic/Hydraulic Layout
6321534 Linear Power Supply Card
6321553 AC Power/Vacuum Relay Card
6321564 Motor/Solenoid Driver Card
6321646 Electrical Interconnect Diagram
Table 6.1-2 DCNs and Descriptions for Schematics Not Included in This Manual
DCN Description
6321108 Vacuum Sensor Card
6321634 DRA Card
6321690 Sensor Preamp Adapter Card
6321706 SPAD Card
6321709 Hgb Preamp Card
6321714 URA Card
C