Service manual

PN 4237242C
4.20-3
SERVICE AND REPAIR PROCEDURES
TRAVERSE MOTOR
4
6. Connect the electrical connectors:
r Flex cable (from Probe/Opto Sensor card) to J1 (on Flex Connect card).
r Traverse motor to J5 (behind the Syringe Assembly).
r Aspirate position sensor to J17 (on Solenoid Interconnect card).
r WBC position sensor to J15 (on Solenoid Interconnect card).
r RBC position sensor to J16 (on Solenoid Interconnect card).
7. Replace the access cover, lower the upper chassis and turn ON the instrument’s power.
Verification
Perform an SVP (Heading 5.1).