Specifications

3. Setting the Time and Calendar

If the watch has stopped running due to insufficient charging or the second hand

is moving at 2-second intervals when setting the time, first return the watch to 1-

second interval movement before setting the time by charging with reference to

the section entitled, “For Proper Power Generation”. If the crown is a screw lock

type, the screw should be loosened before the operation. Make sure to tighten

the screw again after the settings are made.

[Setting the Time]

<When the second hand is moving at

1-second intervals (generating elec-

tric power display) / 2-second inter-

vals (insufficient recharging warning

display) / 2-second hitch movement

(time setting warning display)>

1. Pull the crown twice to the time cor-

rection position when the second

hand reaches the 0 seconds position.

2. Turn the crown to set the time.

• The date changes at AM 0. Make sure not to mistake AM for PM and vice

versa when setting the time.

• The date indication starts changing from around 9 PM and is completed

around 1 AM.

•A more precise setting of the time can be accomplished by advancing the

minute hand 4 to 5 minutes from the correct time and then moving it back to

the correct setting.

3. Return the crown to its normal position in synchronization with the telephone

time tone. The second hand will start to move and the watch will start ticking

away from the correct time.

<When the second hand is moving at 10-second intervals (indicating that

power is not being generated)>

1. Pull the crown twice to the time correcton position when the second hand

reaches the 0 seconds position.

2. Turn the crown to set the time.

3. Return the crown to its original position in synchronization with the telephone

time tone. The second hand will start to move and the watch will start ticking

away from the correct time.

Normal position

Time correction position

Crown