Technical information

38
|
|
39
MODELS – AT703*
PROXIMITY
Mvmt. Cal. No. W760
Crown
Upper Right
Button (B)
Date of Month
Minute Hand
Hour Hand
Seconds/Chronograph
Second Hand
Mode Hand
Lower Right
Button (A)
Multi-Function Hand
24-Hour Hand
NOTE: After a complete loss of power or an abnormal
function is noticed, an ALL RESET and 0-POSITIONING
is required. Be sure to set the time and date after
performing these procedures.
NOTE: This watch features a “power save” function.
After 30 minutes of no exposure to light sufficient for
charging, the watch enters “power save” mode. The
second hand will stop. Although the second hand is
not moving, the correct seconds are stored in memory.
Power save mode is automatically canceled when the
watch is either exposed to light sufficient for charging
or a Bluetooth
®
4.0 notification from a compatible
iPhone
®
(4S, 5, 5C or 5S) is received.
TO CHANGE OPERATION MODES
•
Pull the crown out one ‘click.’
•
Rotate the crown clockwise or counterclockwise
to move the mode hand located at the 6:00 sub dial
to the desired operation mode.
•
Push the crown in one ‘click.’ This completes
changing modes.
ALL RESET PROCEDURE AND
0-POSITIONING PROCEDURE
•
Pull the crown out one ‘click.’
•
Rotate the crown to move the mode hand
(6:00 sub dial) to the “>0<“ position.
•
Pull the crown out one additional ‘click.’
•
Press and hold both the lower right button (A) and
upper right button (B) for 1 second then release.
The watch will vibrate and the hands move slightly
indicating a successful all reset. You must now set
the 0-positions. The correct 0-positions are:
•
Press and release the upper right button (B).
The hour and minute hands will move slightly.
•
Rotate the crown to move the hour, minute and
24-hour hands to their respective zero positions.
•
Press and release the upper right button (B).
The second hand will move slightly indicting it
is ready for setting. Rotate the crown to move
the second hand to the 12:00 position.
•
Press and release the upper right button (B).
The multi-function hand (2:00 sub dial) and date
will move slightly indicating they may now be set.
•
Rotate the crown so that the multi-function hand
(2:00 sub dial) is at 6:00, just after the date has
reached the position between 31 and 1.
•
Press the crown in two ‘clicks.’ This completes the
ALL RESET and 0-POSITIONING. You must now set
the time and perpetual calendar.
TO SET THE TIME
NOTE: If the watch is actively paired with a compatible
iPhone
®
(4S, 5, 5C or 5S) featuring Bluetooth
®
4.0 technology,
you may update the time automatically. There are times
however that you will need to manually set the time.
•
Pull the crown out one ‘click.’
•
Rotate the crown to move the mode hand (6:00 sub
dial) to the ‘TME’ (time) mode.
•
Pull the crown out one additional ‘click.’
•
Press and release either the lower right button (A)
or upper right button (B). The second hand will
rotate to the 12:00 position.
•
Rotate the crown clockwise or counterclockwise to
set the time. Be sure to pay attention to the 24-hour
hand (10:00 sub dial) to ensure the proper AM or PM
time is set.
•
NOTE: Spinning the crown quickly will engage the
rapid advance feature. To cancel the rapid advance
feature, turn the crown one ‘click’ in either direction.
•
Push the crown in two ‘clicks.’
TO SET THE PERPETUAL CALENDAR
•
Pull the crown out one ‘click.’
•
Rotate the crown to move the mode hand (6:00 sub
dial) to the ‘CAL’ mode.
•
Pull the crown out one additional ‘click.’ The second
hand will rotate to the current leap year position set
in memory and the function hand (2:00 sub dial) will
rotate to the current day of week set in memory.
•
Rotate the crown to set the current month and leap
year. Each hour indice will represent the month, while
the hour indice and 3 minute indices immediately
following will indicate the leap year.
• 
Press and release the upper right button (B).
The multi-function hand (2:00 sub dial) will move
slightly indicating the date of month may be set.
•
Rotate the crown clockwise or counterclockwise to
adjust the date.
NOTE: The multi-function hand (2:00 sub dial) makes
5 rotations for each date change.
•
Press and release the upper right button (B).
The multi-function hand (2:00 sub dial) will
rotate slightly indicating the current day of week
may be set.
•
Rotate the crown clockwise or counterclockwise
to set the current day of week.
•
Press the crown in two ‘clicks.’ This completes
setting the calendar.
TO SET THE LOCAL (SECONDARY) TIME
•
Pull the crown out one ‘click.’
•
Rotate the crown to move the mode hand
(6:00 sub dial) to the ‘L-TM’ (local or secondary
time) mode.
•
Pull the crown out one additional ‘click.’
•
Rotate the crown clockwise or counterclockwise
to set the time in 15 minute increments. Be sure to
pay attention to the 24-hour hand (10:00 sub dial)
to ensure the proper AM or PM time is set.
•
Push the crown in two ‘clicks.’
TO USE THE CHRONOGRAPH
NOTE: While using the chronograph, if 60 minutes
has elapsed, the chronograph will automatically stop
and reset.
NOTE: While in chronograph mode, and the watch is
actively paired with a compatible iPhone
®
(4S, 5, 5C
or 5S) featuring Bluetooth
®
4.0 technology, visual
notification of email, schedule and calls is disabled.
Notification is through vibration only.
•
Pull the crown out one ‘click.’
•
Rotate the crown to move the mode hand (6:00 sub
dial) to the ‘CHR’ (chronograph) mode.
•
Push the crown in one ‘click.’
•
Press and release the upper right button (B) to start
the chronograph.
•
Press and release the upper right button (B) to stop
the chronograph.
•
Press and release the lower right button (A) to reset
the chronograph.
For additional operating instructions and compatible
iPhone
®
(4S, 5, 5C or 5S) pairing instructions, please
refer to the W760 movement instruction guide found
in the technical support section of our website
www.citizenwatch.com
Hour, minute and second hands: 12:00
24-hour hand (10:00 sub dial): 24
Multi-Function hand (2:00 sub dial): 6:00
Date of month: Between 31 and 1
January
February
March
April
May
June
December
July
August
September
October
November
Month of Year Leap Year Setting
Leap year
1 year past leap year
2 years past leap year
3 years past leap year
FEATURES
•
Light-Powered
•
Perpetual Calendar
•
Chronograph
•
Power Reserve Indicator
•
Bluetooth
®
4.0
•
CITIZEN Proximity App
•
Time/Date Sync
•
iPhone
®
Search
•
Call & Email Alert
•
Calendar Event Notification
BENEFITS
•
Environmentally Clean Energy Source
•
Accurate to the year 2100
•
1-Second Chronograph Measures up to 60 Minutes
•
Displays Remaining Charge
•
Low Energy Powered by Eco-Drive
•
Free Convenient Technical Updates
•
Updates Across Time Zones via GSM Phone Signal
•
Phone Plays a Tone Within 10 Meter Sync Range
•
Notification Delivered Through Combination of
Subtle Watch Vibration and Second Hand Indicator
Please view our interactive setting
instructions at www.citizenwatch.com
Compatible with Apple
®
iPhone
®
4S, 5, 5C or 5S. The Apple
®
iPhone
®
App graphic and logo are registered trademarks of Apple, Inc.
The Bluetooth
®
graphic and logo are registered trademarks of Bluetooth SIG, Inc. Facebook
®
, and Facebook Messenger
®
notifications only with Facebook Inc. app.
Twitter
®
notifications only with Twitter Inc. app. Third party apps not supported.
MODELS – AT80**
WORLD CHRONOGRAPH A•T
Mvmt. Cal. No. H80*
FEATURES
•
Light-Powered
•
Atomic Timekeeping
•
World Time
•
Perpetual Calendar
•
Chronograph
•
Power Reserve Indicator
BENEFITS
•
Environmentally Clean Energy Source
•
Radio-Controlled Accuracy
•
Time Adjustment in 26 Time Zones
•
Accurate to the Year 2100
•
1/20-Second Chronograph
Measures up to 60 Minutes
•
Displays Remaining Charge
NOTE: Under normal conditions, this watch will receive
radio signals to automatically update the time and
calendar. There may be conditions in which the radio
signal cannot be received. If a signal cannot be received,
the watch will operate normally, but not sync with the
radio signal.
NOTE: After a complete loss of charge or an abnormal
display or function is noticed, an ALL RESET and
0-POSITIONING PROCEDURE must be followed. Be sure to
set the time and date after performing these procedures.
RADIO RECEPTION
The watch will receive radio signals both automatically
and on-demand. Both the time and calendar will update
based on the current time zone.
Automatic reception occurs first at 2:00 AM and 3:00 AM.
If the 2:00 AM reception is successful, the 3:00 AM
reception attempt will not occur.
The “on-demand” feature allows the user to activate radio
reception manually. However, depending on the time of
day, weather, radio interference, etc., the on-demand
feature may not result in a successful radio signal update
and the watch may have to be manually set, such as when
changing radio signal zones.
NOTE: Based on signal strength, it can take from 2 to 30
minutes to complete the radio reception update process.
During the update process, the watch must not be moved
otherwise the transmission signal may be interrupted
resulting in an unsuccessful time/calendar update.
For in-depth instructions on the radio reception feature,
please refer to your owner’s guide.
ALL RESET AND 0-POSITIONING PROCEDURE
•
Pull the crown out two ‘clicks.’
•
Press and hold the upper right (B) and lower right (A)
buttons simultaneously for 4 seconds, then release
them. The hands and date will move back and forth to
indicate the ALL RESET is successful.
•
Rotate the crown in either direction so the chronograph
1/20-second indicator (6:00 sub dial) is pointing to ‘00’
(straight up).
•
Press and release the upper right button (B). The second
and minute hands will rotate counterclockwise to show
a clear view of the 12:00 sub dial. The chronograph
minute hand (12:00 sub dial) will then move slightly
indicating the chronograph minute hand and date of
month may be set.
•
Rotate the crown clockwise or counterclockwise so
that the date is centered between 31 and 1, and the
chronograph minute hand (12:00 sub dial) is pointing
to ‘60’ (straight up).
•
Press and release the upper right button (B).
The minute and hour hands will move slightly.
•
Rotate the crown clockwise or counterclockwise
to move the minute and hour hands to the 12:00
position, and the 24-hour hand (9:00 sub dial) to ‘24’.
NOTE: The 24-hour hand moves in conjunction with
the hour and minute hands.
•
Push the crown in two ‘clicks.’ You must now set
the time and perpetual calendar.
TO SET THE TIME AND PERPETUAL CALENDAR
NOTE: After receiving a radio signal, the time and date
will automatically set. There may be circumstances
however for which you need to manually set the time and
date such as after an ALL RESET and 0-POSITIONING.
•
Pull the crown out one ‘click.’
•
Rotate the crown clockwise or counterclockwise until
the second hand indicates the time zone nearest your
current location. The hour, minute and 24-hour hands
will rotate to the current time set in memory for the
chosen time zone.
•
Press and release the upper right button (B) to move
the chronograph minute hand (12:00 sub dial) to
indicate daylight saving time ON or OFF.
•
Press and hold the upper right button (B) for two
seconds then release. The second hand will rotate
to the 6:00 position and the chronograph minute hand
(12:00 sub dial) will rotate to ‘60.’
•
Pull the crown out one additional ‘click’ to the time
setting position. The second hand will rotate to the
12:00 position, and the hour and minute hands will
move slightly indicating the time may be set.
•
Rotate the crown to set the correct time for the
chosen time zone. Be sure to pay attention to the
24-hour hand (9:00 sub dial) to ensure the proper
AM or PM time is set.
•
Press and release the upper right button (B). The
chronograph minute hand (12:00 position) will rotate
slightly indicating the date of month may be set.
•
Rotate the crown clockwise or counterclockwise to
set the current date of month. NOTE: The chronograph
minute hand (12:00 sub dial) rotates 5 times for each
change of date.
•
Press and release the upper right button (B). The
chronograph 1/20-second hand (6:00 sub dial) will rotate
slightly indicating the current day of week may be set.
•
Rotate the crown clockwise to set the current day
of week.
•
Press and release the upper right button (B). The second
hand will rotate slightly indicating the leap year may
be set.
•
Rotate the crown to set the current month and
leap year. Each hour indice represents the month
of year, while each hour indice and the following
3 minute indices represents the leap year.
•
Push the crown in two ‘clicks’. This completes
setting the time and calendar.
TO CHANGE TIME ZONES
•
Pull the crown out one ‘click’. Rotate the crown
clockwise or counterclockwise until the second
hand indicates the time zone nearest your
current location.
•
Press and release the upper right button (B)
to turn daylight saving time ON or OFF.
•
Push the crown in one ‘click.’
This completes changing time zones.
TO USE THE 60 MINUTE CHRONOGRAPH
NOTE: After 30 seconds of timing, the chronograph
1/20-second hand will stop. Measurement will
continue in memory and be reflected when the
chronograph is stopped.
•
Press and release the upper right button (B)
to start the chronograph.
•
Press and release the upper right button (B)
to stop the chronograph.
•
Press and release the lower right button (A)
to reset the chronograph.
•
To exit chronograph mode, press and release
lower right button (A). The watch will resume
normal operation.
For further instructions and additional features of
the World Chronograph A
•
T, please refer to your
owner’s manual or the technical support section
on our website at www.citizenwatch.com.
January
February
March
April
May
June
December
July
August
September
October
November
Month of Year
Leap Year Setting
Leap year
1 year past leap year
2 years past leap year
3 years past leap year
Time Zone Scale
Radio Reception Scale
Day of Week Scale
Lower Right Button (A)
Upper Right Button (B)
Crown
Minute Hand
Chronograph Minute Hand
Hour Hand
24-Hour Hand
Second Hand
Chronograph 1/20-Second Hand
Please view our interactive setting
instructions at www.citizenwatch.com