Specifications

26 27
Note (1): Demonstration movement is not performed when the watch is insuffi-
ciently charged. Perform the all-reset procedure only after charging the
watch sufficiently.
(2): Do not perform the all-reset procedure while the date is changing. This
can cause the date position to shift. If the date position should hap-
pened to become shifted out of position, pull out the crown to the first
click after completing the all-reset procedure, and turn the crown to the
left while pressing button (A) to set the date to the correct position.
8. All-Reset
The display of this watch may not read correctly as a result of being subjected to
the effects of static electricity or strong impact and so forth. When this happens,
perform the procedure described in "9. Reference Position Alignment" after per-
forming the all-reset procedure described below.
1. Pull out the crown to the second click (time setting position).
* The second hand moves to the 0-position stored in memory and stops.
2. Continuously press button (A) for at least 2 seconds.
* The hour hand and minute hands performs a demonstration movement con-
sisting of moving forward then backward and then forward again.
* The second hand makes one revolution in the forward direction.
This completes the all-reset procedure. Always make sure to perform the
reference position alignment procedure after performing all-reset.