Specifications

ManualsBrandsCitizen ManualsGadgetsE76

2 3

CONTENTS

1. Features ................................................................................................... 4

2. Before Using ............................................................................................ 5

3. Setting the Time and Date ...................................................................... 6

* Setting the Time

* Setting the Date

* Correcting the Time Difference

4. Functions Unique to Solar Powered Watches .................................... 18

* Insufficient Charge Warning Function

* Time Setting Warning Function

* Overcharging Prevention Function

* Power Save Function

5. General Reference for Charging Times .............................................. 23

6. Notes Regarding Handling of this Watch ........................................... 24

* Charging Precautions

7. Replacing the Secondary Battery ........................................................ 25

8. All-Reset ................................................................................................ 26

9. Reference Position Alignment .............................................................. 28

10. Precautions .......................................................................................... 30

11. Specifications ....................................................................................... 36

English

Fig.1

Fig.2

Crown Operation

–Models Equipped with a Crown Cover–

Insert your fingernail between the case and crown cover and open

the crown cover so that it opens to the outside.

* Always make sure to close the crown cover after operating the

crown.

<Important Point when Turning the Crown for Setting

Time and Date, Correcting Time Difference or Setting

Reference Position>

Although the crown can be operated by turn-

ing while pinching between your fingers or fin-

gernails (Fig. 1), the crown can be turned more

easily by turning while pressing against the

crown with the thick portion of your finger

(Fig. 2).

* Please refer to the manual for information

on the procedures for setting the time and

date, correcting time difference and setting

the reference position.

Summary of content (19 pages)

PAGE 1
2 English CONTENTS 1. Features ................................................................................................... 4 2. Before Using ............................................................................................ 5 3. Setting the Time and Date ...................................................................... 6 * Setting the Time * Setting the Date * Correcting the Time Difference 4. Functions Unique to Solar Powered Watches ....................................
PAGE 2
1. Features This watch is a solar-powered watch that contains a solar cell in its face that drives the watch by converting light energy into electrical energy.
PAGE 3
. Setting the Time and Date If the watch is provided with a cover, open the cover to set the time or date, and then close the cover once the time or date has been set. Seconds (number of years elapsed since the most recent leap year and month during date correction) BUTTON(A) CITIZEN (0) Normal position and time difference correction position (1) Date correction position 7 (2) Time setting position Date [Setting the Time] 1.
PAGE 4
[Setting the Date] This watch is provided with a virtual calendar function. Once it is set, the year, month and date change automatically, including leap years. 1. When the crown is pulled out to the first click (calendar correction position), the second hand moves to the year and month position stored in memory and stops. 2. Turn the crown and set the date.
PAGE 5
✰How to read the month: January: Between 1:00 and 2:00 February: Between 2:00 and 3:00 : : : ✰How to read the year: Leap year: First mark in each month zone 1 year after most recent leap year:Second mark in each month zone 2 years after the most recent leap year: Third mark in each month zone 3 years after the most recent leap year: Fourth mark in each month zone December: Between 12:00 and 1:00
PAGE 6
[Correcting the Time Difference] When button (A) is pressed and the crown is turned continuously, time difference can be corrected in 1 hour units. Time difference cannot be corrected continuously. The time difference can be corrected for 30 seconds after button (A) has been pressed or for 30 seconds after time difference correction (after the hands finish moving). 1. Put the crown in the normal position. 2.
PAGE 7
Note: If the crown is turned to the right to move the hands clockwise to set the time to 1:00, the time will be 1:00 PM and the calendar function will not operate correctly, preventing the date from changing at the proper time.
PAGE 8
When the date has shifted out of the calendar window Normal position CITIZEN 7 1st position 1. Pull the crown out to the 1st position. 2. Turn the crown to the right while pressing button (A). * Continue turning the crown while pressing button (A) until the date appears in the center of the calendar window. 3. Return the crown to the normal position.
PAGE 9
[Reference: Time Differences of Major World Cities Based on UTC] Time City name difference Daylight Time savings time City name difference Daylight savings time ✕ ✕ ✕ London ±0 Bangkok +7 Paris +1 Hong Kong +8 Cairo +2 Tokyo Moscow +3 Dubay +4 Karachi +5 Dakar +6 Sydney ✕ ✕ ✕ +9 +10 Noumea +11 Auckland +12 Honolulu -10 ✕ ✕ * Cities (regions) in which daylight savings time is used are indicated with a while those in which it is not are indicated with an ✕ .
PAGE 10
4.
PAGE 11
Two-second interval movement 2 seconds 2 seconds The second hand moves at two-second intervals to indicate that the watch is insufficiently charged. The watch stops after about 2 days have elapsed. Expose the watch to light to return the second hand to one-second interval movement.
PAGE 12
The power save function is canceled when the solar cell is exposed to light and power generation is resumed. Each of the hands advance rapidly to the current time and begin moving. The date is also advanced continuously to the current date. 5. General Reference for Charging Times The time required for recharging varies according to the model of the watch (color of the dial, etc.). The following times are shown below to serve only as a reference.
PAGE 13
6. Notes Regarding Handling of this Watch 7. Replacing the Secondary Battery The secondary battery used in this watch does not have to be periodically replaced in the manner of ordinary batteries since it is able to be charged and discharged repeatedly. Please note that if you wear long sleeves, the watch can easily become insufficiently charged as a result of it being concealed and unable to be exposed to light.
PAGE 14
8. All-Reset The display of this watch may not read correctly as a result of being subjected to the effects of static electricity or strong impact and so forth. When this happens, perform the procedure described in "9. Reference Position Alignment" after performing the all-reset procedure described below. 1. Pull out the crown to the second click (time setting position). * The second hand moves to the 0-position stored in memory and stops. 2. Continuously press button (A) for at least 2 seconds.
PAGE 15
9. Reference Position Alignment After performing the all-reset procedure, align the hour and minute hands at their reference positions by pulling out the crown to the second click, and the second hand and date to their reference positions by pulling out the crown to the first click. 1. Align the hour and minute hands at the 12:00 position with the crown pulled out to the second click. (1) Turning the crown to the right moves the hour and minute hands forward.
PAGE 16
10. Precautions For correct use within the design limits of the watch, confirm the level of waterresistance of your watch, as indicated on the dial and case, and consult the table. CAUTION: Water-resistance performance There are several types of water-resistant watches, as shown in the following table. Examples of use The unit “bar” is roughly equal to 1 atmosphere. *WATER RESIST(ANT) xx bar may also be indicated as W.R. xx bar.
PAGE 17
• Water-resistance for daily use (to 3 atmospheres): This type of watch is waterresistant to minor exposure to water. For example, you may wear the watch while washing your face; however, it is not designed for use underwater. • Upgraded water-resistance for daily use (to 5 atmospheres): This type of watch is water-resistant to moderate exposure to water. You may wear the watch while swimming; however, it is not designed for use while skin diving.
PAGE 18
• Use a soft, dry cloth to wipe off perspiration and dirt from the leather band. • To clean a metal, plastic, or rubber watchband, wash away dirt with mild soap and water. Use a soft brush to remove dust and dirt jammed in the gaps in the metal band. If your watch is not water-resistant, take it to your dealer. NOTE: Avoid using solvents (thinner, benzine, etc.), as they may mar the finish.
PAGE 19
11.