Specifications

-
8
-
CD-S500 (ESC/POS)No cut functionDot impact printer
CD-S501/503 (ESC/POS)With cut function
BD2-222x For LT2xxx mechanismControl Board
BD2-428x For MLT428x mechanism
Remarks: Ver.1.6xx drivers do not support “Electronic Journal”, “Watermark”, “Upside Down”,
“Coupon” and “Reprint” function.
3. Supported interfaces
Supported interfaces are as follows.
Serial / CITIZEN COM
Parallel
USB
USB Virtual COM
LAN or Wireless LAN / CITIZEN TCP/IP
(This document does not cover TCP/IP port driver. For the details of TCP/IP port, refer to separate
document “CITIZEN TCP/IP Port manual”.)
Caution
USB Virtual COM driver
If you use CT-S281/310/310II/601/651/801/851/2000/4000 in USB Virtual COM mode, it is
necessary to install USB virtual COM driver.
CITIZEN COM Port Monitor
If you use serial interface, use “CITIZEN COM Port Monitor” to get the printer status.
If you use 1.6x driver and CITIZEN COM, install “CITIZEN COM” prior to the driver installation.
CITIZEN TCP/IP Port Monitor
If you use LAN or wireless LAN interface, use “TCP/IP Port Monitor” to get the printer status.
If multiple PCs connect to a printer through LAN or wireless LAN and one of the PC is turned off
without terminating LAN connection, the printer will check the communication between the PC and
the printer and then terminate the LAN connection. Duding checking the communication, printer
stops any communication with other PCs. （Max. 180 sec.）