Specifications

-
44
-
6. Barcode
Using following font, barcode can be printed on the printer.
Barcode font Font size
Codabar 20 / 40 / 42 / 60 / 64 / 80 / 84
Code128 20 / 40 / 42 / 60 / 64 / 80 / 84
Code39 20 / 40 / 42 / 60 / 64 / 80 / 84
Code93 20 / 40 / 42 / 60 / 64 / 80 / 84
JAN13 (EAN) 20 / 40 / 42 / 60 / 64 / 80 / 84
JAN8 (EAN) 20 / 40 / 42 / 60 / 64 / 80 / 84
ITF 20 / 40 / 42 / 60 / 64 / 80 / 84
UPC-A 20 / 40 / 42 / 60 / 64 / 80 / 84
UPC-E 20 / 40 / 42 / 60 / 64 / 80 / 84
*This barcode printing utilizes the printer function on the printer.
* Size of barcode can be selected by choosing font size.
* As mentioned in previous section, HRI character can be printed above, below or both.
* The wider barcode than printing width cannot be printed.
* Each barcode has limitation of characters to use. Please refer to Command reference.
* The sub code set type A/B/C for Code128 should be specified as {A, {B, {C prior to the print data.
* The data for sub code set C of Code128 is printed in decimal address of the input character.
For example, Input data “1” => Output 49 (”1” address = 31h = 49dec)
* Printer font and barcode cannot be printed in the same line.
* The function of centering or right aligning by application software does not work with the driver.
* As this function utilizes the printer’s internal function, barcode image cannot be shown on the Windows
application software. The barcode data is shown instead.
* If printing direction is set for Landscape (Horizontal), barcode cannot be printed.
* In the font name of “JAN13 (EAN)” and “JAN8 (EAN)”, a space is included before the “(“.
Example (““ means a space)
“JAN13(EAN)”
“JAN8 (EAN)”