Operation Manual

ManualsBrandsCitizen ManualsComputer equipmentCW-01

CITIZEN SYSTEMS JAPAN CO.,LTD.

・

Use only with the designated voltage and frequency. Improper connection could cause electric

shock or fire.

・

void overstressing outlets and using extension cords. The outlet could overheat and cause a

fire.

・

Do not damage, destroy, bundle, or alter the power cord. Also, placing heavy objects on, pull

ing, or bending the cord too much can damage it, and could cause a fire.

・

Do not set the printer up in places with salinity or corrosive gases in the air. This could

cause a fire.

・

Do not block the cooling fan or vents. Heat could build up in the printer and cause a

malfunction or a fire.

・

Do not stand or place heavy objects on the printer. Also, do not use excessive force on the

buttons, switches, terminals, etc. This could break the printer and cause injury to the user o

other people.

・

Store the bag for the printer out of reach of children. It could cause suffocation

if placed

over the head.

・

Do not open the printer cover while printing. This could break the printer.

・

Do not spill or spray liquids or chemicals into the printer.

・

When cleaning the cover, do not use thinner, trichoroethane, benzene, ketone-based cleaners,

or chemically treated cloths. They could discolor or deteriorate the cover.

・

Be careful to avoid injury or damage from the edges in the printer.

・

Do not use this printer for applications where malfunction could be life-threatening

(such as medical, space, aeronautic, or other applications that require extreme reliability).

・

The printer weighs approximately 24 kg (52 lbs). When moving it, use two or more people,

and try to avoid strain when lifting it. Lifting recklessly or dropping the printer could cause

injury.

・

Locate the printer as close to an outlet as possible, and allow easy access to unplug the

power cord in case of problems.

・

If there is any dust on the plug, clean it off thoroughly. It could cause electric shock or a

short-out.

・

When disposing of the printer, peripheral items, packaging, or media, please abide by local

waste removal ordinances. For details, refer to your local government offices.

・

If metal objects or liquids have fallen into the printer, and there is smoke, a strange odor, or

any other apparent abnormality, immediately turn off the power, and unplug the power cord.

Then contact a service representative. Do not continue using the printer if it is not operating

properly. This could cause electric shock, short circuit, or fire.

・

When unplugging the cord, grip the plug. Do not pull on the cord. It could damage

the cord, and cause electric shock or fire.

・

Be sure to attach the ground. Otherwise, it could cause a short circuit, electric shock, or fire.

・

Do not plug in or unplug the cord with wet hands. This could cause electric shock.

・

Do not open the inside of the printer, disassemble internal parts, or modify the printer.

It could cause electric shock, fire, or injury, or break the printer. For internal check-ups,

adjustments, or repair, please contact a service representative.